本研究探討議題為探討台灣光電模組與IC測試廠如何利用精實流程改善的概念提升生產的績效與企業的競爭力。由於傳統的流程改善多把焦點放在能產生附加價值的作業上，忽略了其它不具附加價值的動作以及潛藏的生產浪費。因此本研究從精實消除浪費的精神出發，提出精實流程改善的方法，去除一切不必要的浪費與不具附加價值的作業。
探討對象選取台灣光電模組與IC 測試生產線，包括了LCD面板、背光模組、光收發模組與IC測試的代表性個案。除了利用現場實地收集數據的方式驗證改善的成效之外，也採取個案訪談的途徑深入分析個案公司如何進行精實流程改善、改善過程中會遇到的問題、改善範圍、改善方法等構面，最後將結果歸納成一整合模型，具體呈現各個構面之間的關係。最後提出導入精實流程改善的流程架構，說明企業應該如何運用此架構模型導入精實流程改善。本研究並以個案後續改善方案為例說明此架構模式能有助於企業找出未來改善的契機和機會，加快改善過程之作法，並且依循著導入的流程進一步讓公司朝精實的目標邁進。

This research discusses how the lean process improvement can enhance the production performance and competitive advantage of optronics module and IC testing factories in Taiwan. Traditional process improvement concepts have focused on the value-added parts of the process and often overlooked other non-value-added activities which contain the potential wastes in the existing process. Our research applies the concept of lean production for process improvement which holds the potential of eliminating all kinds of wastes in many avoidable or unavoidable non-value-added activities in the module manufacturing processes.
This research focuses on the practices in optronics module assembly and IC testing lines, including the processes for LCD panel, LCD backlight, and transceiver module manufacturing, as well as IC inspection. This research uses on-site observations and date collections for gaining insights on relating the process improvement program activities and performance. Supplementary interviews are also used to analyze and confirm how the case teams improve their manufacturing process with lean production concepts. The study then generalizes and clarifies the relationships among the improvement scopes, programs, waste reduction areas, and performance to form an integrated model for lean production practices in module manufacturing. This research finally constructs a follow-up improvement situation in one of the case study to test this model’s ability to identify further improvement opportunities and program focus for possible acceleration of lean improvement progress.

英文部分
1. Adesola, S., Baines, T., 2005. Developing and evaluating a methodology for business process improvement. Business Process Management Journal, Vol. 11, No. 1, 37-46
2. Alter, A.E., 1990.The corporate make-over. CIO, 4, 3, 32-42
3. Bateman, N., Rich, N., 2003. Companies’ perceptions of inhibitors and enablers for process improvement activities, International Journal of Operations & Production management, Vol. 23, No. 2, 185-199
4. Bicheno, J., 2000. The lean toolbox, Picsie Books, Buckingham
5. Brunet, A.P., New, S., 2003. Kaizen in Japan: an empirical study, International Journal of Operations & Production Management, Vol. 23, No. 12, 1426-1446
6. Christer, K., 1996. Assessing changes towards lean production, International Journal of Operations & Production Management, Vol. 16, No. 2, 24-41
7. Chuck, C.H., Ngai, W.T., 2007. An investigation of the relationships between organizational factors, business process improvement, and ERP success, Benchmarking: An International Journal, Vol. 14, No. 3, 387-406
8. CSC Index, State of Reengineering Report, CSC Index, 1994
9. Davenport, Short, 1990. The new industrial engineering: Information technology and business process redesign. Sloan Management Review, 32, 11-27
10. Ebrahimpour, M., Schonberger, R.J., 1984. The Japanese Just-In-Time/Total quality control production system: potential for developing countries. International Journal of Production Research 22 (3), 422-426
11. Finch, B.J., Cox, J.F., 1986. An examination of Just-In-Time management for the small manufacturer: with an illustration, International Journal of Production Research 24 (2), 342-392
12. Fullerton, R.R., Mcwatters, C.S, 2001. The production performance benefits from JIT implementation. Journal of Operations Management 19, 81-96
13. Grover, V., Malhotra, M.K., 1997. Business process reengineering: A tutorial on the concept, evolution, method, technology and application, Journal of Operations Management 15, 193-213
14. Guimaraes, T., 1997. Empirically testing the antecedents of BPR success, International Journal of production economics 50, 199-210
15. Hammer, M., 1990. Reengineering work: don’t automate, obliterate, Harvard Business Review, July-August, 104-112
16. Hammer, M., Champy, J., 1993. Reengineering the corporation: A manifesto for business revolution, Harper Business Review, New York, NY.
17. Harrington, H.J., 1991. Business process improvement: The breakthrough strategy for total quality, Productivity and Competitiveness, McGraw-Hill, New York, NY
18. Hopp, W.J., Spearman, M.L., 2004. To pull or not to pull: What is the question? Manufacturing and Service Operations Management 6 (2), 133-148
19. Hung, S.W., 2006. Competitive strategies for Taiwan’s thin film transistor-liquid crystal display (TFT-LCD) industry, Technology in Society 28, 349-361
20. Ibrahim, A.R., 2005. A model for the assessment of waste in job shop environment, International Journal of Operations & Production Management, Vol. 25, No. 8, 800-822
21. Jeong, B., Kim, S.W., Y.J. Lee, 2001. An assembly scheduler for TFT LCD manufacturing, Computers & Industrial Engineering 41, 37-58
22. Jim, L., 2006. Lean manufacturing: eliminate wastes, Upholstery Manufacturing, 19, 19-83
23. Kettinger, W.J., Grover, V., 1995. Special section: toward a theory of business process change management, Journal of Management Information Systems 12, 9-30
24. Krafcik, J.F., 1988. Triumph of the lean production system. Sloan Management 16 (1), 21-41
25. Kumar, S., Harms, R., 2004. Improving business processes for increased operational efficiency: a case study, Journal of Manufacturing Technology Management, Vol. 15, No. 7, 62-74
26. Lientz, B.P., Rea, K.P., 2000. Professional’s guide to process improvement: maximizing profit, efficiency, and growth, Harcourt Professional Publishing
27. Liker, K., Jeffery, 2003. The Toyota way: 14 management principles from the world’s greatest manufacturer, 1st edition, Mcgraw Hill
28. Mark, A.N., Sheila, R. P., 2007. Improving quality through lean concepts, Quality, 46, 13, 24-25
29. Pagh, J.D., 1998. Supply chain postponement and speculation strategies: how to choose the right strategy, Journal of Business Logistics, Vol 19, No.2, 13-33
30. Papadopoulou, T.C., Ozbayrak, M., 2005. Leanness: experiences form the journey to date, Journal of Manufacturing Technology Management, Vol 16, No.7, 784-807
31. Ranganathan, C., Dhaliwal, J.S., 2001. A survey of business process reengineering practices in Singapore, Information & Management 39, 125-134
32. Robbins, S., Coulter, M., 2003. Management, Hwa-Tai, Taipei
33. Roberto, P., 1998. Applying the lessons learned from 27 lean manufacturers. The relevance of relationships management, International Journal of Production Economics 55, 223-240
34. Sanjay, B., Peter, B., 2006. Lean viewed as a philosiphy, Journal of Manufacturing Technology Management, 17, 1/2, 56-72
35. Sayed, M.A., 2004. Does manufacturing need to make JIT delivery work?, Management Research News, 27, 1, 27-42
36. Senn, J., 1991. Reshaping business processes through reengineering. SIM Network, 2, 4-7
37. Shah, R., Ward, P.T., 2003. Lean manufacturing: context, practice bundles, and performance, Journal of Operations Management 21, 129-149
38. Shah, R., Ward, P.T., 2007. Defining and developing measures of lean production, Journal of Operations Management 25, 785-805
39. Shin, H.J., Leon, V.J., 2004. Scheduling with product family set-up times: an application in TFT LCD manufacturing, International Journal of Production Research, Vol. 42. No. 20. 4235-4248
40. Suzaki, K., 1993. The new shop floor management: empowering people for continuous improvement, The Free Press, New York, N.Y
41. Tai, W.S., Huang, C.E., 2007. The relationship between electronic business process reengineering and organizational performance in Taiwan, Journal of American Academy of Business, Cambridge 10, 2, 296-301
42. Takashi, N., 2000. Adam Smith’s division of labor and structural changes, Structural Change and Economic Dynamics, 11, 5-11
43. Tony, D., Marc, W., 2007. An empirical test of inventory, service and cost benefits from a postponement strategy, International Journal of Production Research, Vol. 45, No. 10, 2245-2267
32. Ulbrich, F., 2006. Improving shard service implementation: Adopting lessons form the BPR movement, Business Process Management Journal 12, 2, 191-205
33. Vakola, M., Rezgui, Y., 2000. Critique of existing business process reengineering methodologies- the development and implementation of a new methodology, Business Process Management Journal, Vol. 6, No. 3, 238-250
34. Womack, J.P., Jones, D.T., 1990. The machine that changed the world. Harper Perennial, New York
35. Yin, R.K., 1989. Case study research: design and methods, Newburry Park Calif., Sag Publications
36. Yin, R. K., 1994. Case study research: Design and methods, 2nd ed. Lodon, CA：Sage

中文部分
1. 大野耐一，「豐田生產方式：追求超脫規模的經營」，民國九十年，國瑞協力會TPS自主研究會
2. 中山清孝，「直傳生產方式，極致的Just in Time/Delivery設計」，民國九十五年，財團法人中衛發展中心
3. 山田日登志，「豐田式生產管理精要—徹底理解豐田生產方式事典」，民國七十九年，先鋒企管管理發展中心
4. 今井正明，「KAIZEN，日本企業成功的奧秘」，民國八十一年，長河出版社
李佩嫻，「面板組裝之最佳動態配對模式」，國立成功大學工業與資訊管理研究所碩士論文，民國九十四年
5. 李俊昇，「液晶面板組裝廠批量製程派工法則之設計」，民國九十二年，國立交通大學碩士論文
6. 李榮縣，「光收發模組大量客製化生產技術管理架構之建置：以SFP產品為例」，民國九十六年，國立清華大學碩士論文
7. 林玉卿，「運用分工檢驗作業方式以提升產能－以IC測試為例」，民國九十七年，國立清華大學碩士論文
8. 吳世暐，「以房屋概念為基礎之精實生產」，民國九十六年，國立清華大學碩士論文
9. 周碩彥，「從大量生產到大量客製」，民國九十五年，科學發展399期，20-25頁
10. 林毓淳，「主生產排程快速規劃系統」，民國九十三年，國立交通大學碩士論文
11. 許運達，「TFT-LCD模組廠生產規劃系統之構建」，民國九十四年，國立交通大學碩士論文
12. 張紹勳，「研究方法」，民國九十年，滄海出版社
13. 陳子立，「以模擬為基礎之先進規劃與排程法－以TFT-LCD模組廠為例」，民國九十二年，國立清華大學碩士論文
14. 陳光辰，「JIT生產方式-理論與導入實例」，民國八十二年，中興管理顧問
15. 陳光辰，「製造管理上課講義」，民國九十五年
16. 陳光辰，「工廠診斷與改善方法上課講義」，民國九十六年
17. 陳陸寄，「背光模組生產流程創新與改善案例之研究探討」，民國九十六年，國立清華大學碩士論文
18. 黃毓瑩，「動態環境下的延遲決策—以標準化、模組化為例」，民國九十年，國立中山大學碩士論文
19. 黃營杉、汪志堅編譯，「研究方法」 (四版)，民國九十一年，華泰文化事業公司
20. 詹姆斯.沃馬克(鍾漢清譯)，「精實革命－消除浪費、創造獲利的有效方法」，民國九十五年，經濟新潮社
21. 廖志豪，「面板組立製程期望配對良率模式之發展-考量切割類型與投入批量」，國立成功大學工業與資訊管理研究所碩士論文，民國九十四年
22. 廖秀姬，「精實生產改善活動之實證研究」，民國九十五年，元智大學碩士論文
23. 賴士葆，「生產與作業管理：理論與實務」，民國九十三年，華泰文化事業公司
其它
1. 中國生產力中心 http://www.cpc.org.tw/
2. 全國碩博士論文網 https://etds.ncl.edu.tw/theabs/index.jsp
3. 奇美電子 http://www.cmo.com.tw
4. 友達光電 http://www,auo.com.tw
5. 群創光電 http://www.innolux.com/
6. 中強光電 http://www.coretronic.com/hr/
7. 瑞儀光電 http://www.radiant.com.tw/
8. 晶元光電 http://www.epistar.com.tw/
9. 南茂科技　http://www.chipmos.com.tw/
10. 日月光半導體 http://www.asetwn.com.tw/
11. 日月欣半導體 http://www.asecl.com.tw/
12. 國立清華大學圖書館 http://www.lib.nthu.edu.tw/
13. 國立交通大學圖書館 http://www.lib.nctu.edu.tw/