隨著LED(發光二極體)亮度的提高與其飽和的色彩，LED開始被運用為液晶顯示器的背光模組光源，採用RGB三色LED取代傳統的冷陰極螢光燈管作為發光源可以大幅改善液晶顯示器的明亮度和色彩表現。然而RGB-LED 背光模組與其光學設計需要一些特殊考量:如個別LED的色彩必須適當混合以獲得良好的色彩均勻度，同時要使RGB LED的光強度可以得到穩定的白光輸出。RGB三色LED背光模組額外的好處還有寬廣的色域範圍、較長的生命週期、節省能源以及符合環保等。RGB三色LED背光模組令人困擾的問題是由於LED在長時間使用下，其元件隨溫度的變化會影響亮度和色溫穩定性，因此光學回饋控制成為LED背光模組的一項關鍵技術。
在本論文中，我們採用了利用光二極體來作回授補償，以使其穩定性提高，並且針對不同顏色LED光找出其和光二極體之間特性的關係，經由類比數位轉換器將兩者關係線性化，再經由微處理器運算所得的最佳值做為參考，以做為回饋控制的依據。

Light Emitting Diode (LED) is light source with high efficient and vivid colors. The illuminance of LED is increasing year by year, so LED is considered to be
integrated into a direct backlight. By using red, green, and blue (RGB) LEDs instead of cold cathode fluorescent lamps (CCFL) in LCD backlights brightness and color
performance LCD displays can be improved considerably. However, the design of an RGB-LED backlight and optical design need some special attention: the colors of the
separate LEDs need to be mixed well to obtain good color uniformity while a good balance between the red, green and blue LED has to be maintained to stabilize the white light. Additional features of an RGB-LED backlight solution are large color range, long lifetime, energy saving and environmental friendliness. An inconvenient property of LED backlight module is the dependence of light output on temperature and lifetime thus resulting in varying chromaticity and luminance. Optical feedback control system is a key technology for LED backlighting module.
In this paper, we use the photodiode of an optical color sensing feedback system for an LED backlight module to improve the stability. Moreover, we find out the
relationship between different colors LED and photodiode characteristic, through A/D converter to linearization the relationship. Refer to the optimum values calculate by microcomputer for the basis to operation the optical feedback control system.

[1] Takuya Otani,“LED Backlights Boost LCD TV Color” NIKKEI ELECTRONICS ASIA, March 2005 Issue.
[2] Satoshi Okubo, Takuya Otani,“New LCD Technologies Boost Color, Fidelity,Response Time” NIKKEI ELECTRONICS ASIA, August 2004 Issue.
[3] Gerard Harbers, Christoph Hoelen, “High Performance LCD Backlighting using High Intensity Red, Green and Blue Light Emitting Diodes.” SID’01 Digest, LP-2,702(2001).
[4] Robert Scott West, “High Brightness Direct LED Backlight for LCD-TV”, Lumileds Lighting, 20000 Victor Parkway Suite 100 Livonia, Michigan, USA, 2003.
[5] H.L. Kwok, “Electronic Materials”, PWS Publishing Company, University of Victoria, Chapter 4.5 The Emission Process, luminescence, page 249~251.
[6] Jasprit Singh, “Semiconductor Devices An Introduction”, Ch. 11 Optoelectonics: Light Emission, page 517~519. McGraw Hill Internation Editions, 1994
[7] E. Fred Schubert, “Light-Emitting Diodes”, 2nd ed, 2006
[8] http://www.lumileds.com/pdfs/DS25.pdf, “Lumileds Luxeon Emitter Technical Data” DS25
[9] Ian Ashdown, “Extended Parallel Pulse Code Modulation of LEDs”, TIR Systems Limited, 7700 Riverfront Gate, Burnaby, British Columbia, Canada V5J 5M4
[10] Marc Dyble, Nadarajah Narendran, Andrew Bierman, and Terence Klein, “Impact of Dimming White LEDs: Chromaticity Shifts Due to Different Dimming Methods”, Lighting Research Center, Rensselaer Polytechnic Institute, Troy, NY 12180
[11] Ramon Pallas-Areny, John G. Webster, “Sensors and Signal Conditioning”, John Wiley & Sons, Inc. 1991, Chapter 9.1 Sensors based on semiconductor junctions, page325~326.
[12] Tugonir Surina, Clyde Herrick, “Semiconductor Electronics”Ch.16, page 340~342.
[13] Ben G. Streetman, Sanjay Banerjee, “Solid State Electronic Devices 5th Edition”,Chapter 8.
[14] Ben G. Streetman, Sanjay Banerjee,”Solid State Electronic Devices 5th edition”,Chapter 5, page 171~177.
[15] Jasprit Singh, “Semiconductor Optoelectronics Physics and Technology”, Ch. 6 Semiconductor junction theory, page 286.
[16] Kwok K. Ng, “Complete Guide to Semiconductor Devices, International Edition”,McGraw Hill, Chapter 50, pin Photodiode, page 402~407.
[17] Ben G. Streetman, Sanjay Banerjee, ”Solid State Electronic Devices 5th Edition”,Chapter 10, page 487~489.
[18] Jasprit Singh, “Semiconductor Devices An Introduction”, Ch. 10.3 Optoelectronic Devices, page 472~476.
[19] Ramon Pallas-Areny, John G. Webster, “Sensors and Signal Conditioning”, John Wiley & Sons, Inc. 1991, Chapter 9 Other Sensing Methods, page 325~330.
[20] Ljubisa Ristic, “Sensor Technology and Devices”, Artech House, 1994, Chapter 9,Planar Silicon Photosensors, page 317~322.
[21] TEMIC Semiconductors, Telefunken Semiconductors, “Silicon PN Photodiode
BPW20R datasheet” page 4, Rev.A2, 15-Jul-96.
[22] S.M. Sze, “Semiconductor Devices Physics and Technology”, AT&T Bell Laboratories, Murray Hill, New Jersey, Section 7.4 Photodetector, page 278~282.
[23] Franc Grum, C.James Bartleson, “Optical Radiation Measurements Volume 2
Color Measurement”, Academic Press, 1980. page 347~350.
[24] Abhay Sharma, “Understanding Color Management”, Charter 3 Color by
Numbers,page 90, figure 3-9. (2004).
[25] Franc Grum, C.James Bartleson, “Optical Radiation Measurements Volume 2 Color Measurement”, Academic Press, 1980. Chapter 4, Modern Illuminats, D65,Daylight limulators, page 155.
[26] Gunter. Wyszecki and W.S. Stiles, “Color Science: Concepts and Methods, Quantitative Data and Formulae 2nd Edition,” WILEY, 1982. page 145~146, CIE method of calculation D-illuminants.
[27] Yoshi Ohno, ”CIE Fundamentals for Color Measurements”, Optical Technology
Division, National Institute of Standards and Technology.
[28] Publication CIE No 15.2, ISBN 3 900 734 00 3 / ISBN 931 7251 59 6 CIE Vienna, Austria.
[29] Daniel Malacara, Color vision and colorimetry - Theory and applications, chapter 6 Color mixtures and colorants.
[30] 鍾富昭，“8051/ 8052 系列原理介紹與產品計設”，全華科技圖書，第一章， page 10~12，(1990).
[31] Armand Perduijn, Sjef de Krijger, John Claessens, Noboru Kaito, etc.“Light Output Feedback Solution for RGB LED Backlight Applications”, SID ’03-Digest 43.21254 (2003)
[32] Deane B. JuDD and Gunter. Wyszecki, “Color in Business, Science and Industry 3rd Edition,” John WILEY & Sons, New, 1975. page 110~116, Foundamental Standards in Colorimetry.