觀於微氣泡於鄰近璧面區域上浮的研究,已有許多關於此方面的實驗結果,但此種研究的模擬卻是少之又少,因此本文的目的是透過數值分析的方式來模擬出微氣泡在鄰近璧面區域的行為並與實驗互相比較驗證。
本文使用雙重網格系統,來模擬三維暫態微氣泡於鄰近璧面區域的流場情形,其中雙重網格的內網格系統是使用非慣性座標系統,跟隨者氣泡移動,可以固定氣泡的計算區域,避免氣泡在網格內移動而造成計算上的誤差,而外網格系統是使用慣性座標系統,相對於內網格系統,便可以記錄氣泡在每個時間區間的移動情形,進而觀察出是否有受wall effect的影響。

[1] Hadamard, J., 1911, “Mouvement Permanent Lent d’une Sphere
Liquide Visqueuse dansun Liquid Visqueux,” C., R., Acad. Sci. Paris
Ser. A-B, 152, pp. 1735-1739.
[2] Moore,D.W.,1963, “The Boundary Layer on a Spherical Gas Bubble,”
J.Fluid Mechanics,16,pp.161-176
[3] Moore,D.W.,1965, “The Velocity of Rise of Distorted Gas Bubbles in
a Liquid of Small Viscosity,” J.Fluid Mechanics,23,pp.749-766
[4] Hirt, C. W., and Nichols, B. D., 1981, “Volume of Fluid (VOF)
Method for the Dynamics of Free Boundaries,” J. Computational
Physics, 39, pp.201.
[5] Unverdi, S., and Tryggvason, G., 1992, “A Front-Tracking Method for
Viscous Incompressible Multi-Fluid Flows,” J. Computational
Physics,100, pp. 25-37.
[6] Shin, S., and Juric, F., 2002, “Modeling Three-Dimensional
Multiphase Flow Using a Level Contour Reconstruction Method for
Front Tracking without Connectivity,” J. Computational Physics, 180,
pp.427-470.
[7] Lee, S. L., and Sheu, S. R., 2001, “A New Numerical Formulation for
Incompressible Viscous Free Surface Flow without Smearing the Free
Surface,”International Journal of Heat and Mass Transfer, 44, pp.
1831-1848.
[8] Hua, J. S., Stene, J. F., and Lin, P., 2008 , “ Numerical Simulation of
3D Bubbles Rising in Viscous liquids Using a FrontTracking
Method,” Journal of Computational Physics, 227, pp. 3358-3382.
[9] Duineveld, P. C., 1995, “The Rise Velocity and Shape of Bubbles in
Pure Water at High Reynolds Number,” J. Fluid Mechanics, 292, pp.
325-332.
[10] Wu, M., and Gharib, M., 2002, “Experimental Studies on the Shape
and Path of Small Air Bubbles Rising in Clean Water,” Physics of
Fluids, 14, pp. L49-L52.
[11] Tomiyama, A., Celata, G. P., Hosokawa, S., and Yoshida, S., 2002,
“Terminal Velocity of Single Bubbles in Surface Tension Force
Dominant Regime,” International Journal of Multiphase Flow, 28,
pp.1497-1519.
[12] Krishna, R., Urseanu, M. I., van Baten, J. M., and Ellenberger, 1999,
“Wall Effects on the Rise of Single Gas Bubbles in Liquids,” Int.
Comm. Heat Mass Transfer, 26, pp. 781-790.
[13] Takemura, F., Takagi, S., and Magnaudet, J., 2002, “Drag and Lift
Forces on a Bubble Rising near a Vertical Wall in a Viscous Liquid,”
J. Fluid Mech., 461, pp. 277-300.
[14] Li, L., Sherwin, S. J. and Bearman, P. W., 2002, “A Moving Frame
of Reference Algorithm for Fluid/Structure Interaction of Rotating
and Translating Bodies,” Int. J. Numer. Meth. Fluids, 38, pp.
187-206.
[15] Lee, S. L., and Liao, W. C., 2005, “Numerical Simulation of a
Fountain Flow on Nonstaggered Cartesian Grid System,” 2005
ASME Fluid Engineering Division Summer Meeting and
Exhibition.
[16]Lee, S. L., and Tzong, R. Y., 1992, “Artificial Pressure for
Pressure-Linked Equation,” International Journal of Heat and Mass
Transfer, 35, pp. 2705-2716.
[17] Lee, S. L., 1989, “A Strongly-Implicit Solver for Two-Dimensional
Elliptic Differential Equations,” Numerical Heat Transfer, 16, pp.
161-178.
[18] Lee, S. L., 1989, “Weighting Function Scheme and Its Application
on Multidimensional Conservation,” International Journal of Heat
and Mass Transfer, 32, pp. 2065-2073.
[19] Lee, S. L., and Sheu, S. R., 2003, “Filling Process in an Open
Tank, ”ASME J. of Fluids Engineering, 125, pp.1016-1021.
[20] Lee, S. L., and Tzong, R. Y., 1991, “An Enthalpy Formulation for
Phase Change Problems with a Large Thermal Diffusivity Jump
across the Interface,” International Journal of Heat and Mass
Transfer, 34, pp. 1491-1502.
[21] Magnaudet J., Rivero, M., and Fabre, J., 1995, “Accelerated Flow
past a Rigid Spherical Bubble. Part 1. Steady Straining Flow,” J.
Fluid Mechanics, 284, pp. 97-135.