本研究以相關性分析軟體FEMtools結合實驗與數值所得振型及
振頻，求取多孔平板正交性等效材料常數，並利用頻率響應函數
(F requency Response Function, FRF)相關函數，修正多孔平板
等效數值模型的參數，使實驗和數值配對的FRF相關性能提高。

八、參考文獻

[1]賴凱弘, "以混合法探討彈性支撐含孔構件之振動行為", 國立清華大學動力機械工程學系博士論文, 2002.
[2]"ANSYS", Revision 5.7, Swanson Analysis Systems, Inc., Houston, PA, U.S.A., 2001.
[3]"FEMtools", Version 2.0, Integration Test and Analysis Data, U.S.A., 2001.
[4]G. Aksu and R. Ali, "Determination of Dynamic Characteristics of Rectangular Plates with Cutouts Using a Finite Difference Formulation", Journal of Sound and Vibration, Vol. 44, pp. 147–158, 1976.
[5]R. Ali and S. J. Atwal, "Prediction of Natural Frequencies of Vibration of Rectangular Plates with Rectangular Cutouts", Computers and Structures, Vol. 12, pp. 819–823, 1980.
[6]A. S. Bicos and G. S. Springer, "Vibrational Characteristics of Composite Panels with Cutouts", AIAA Journal, Vol. 27, No. 8, pp. 1116-1122, 1989.
[7]J. N. Reddy, "Large Amplitude Flexural Vibration of Layered Composite Plates with Cutouts", Journal of Sound and Vibration, Vol. 83, pp. 1–10, 1982.
[8]K. A. Burgemeister and C. H. Hansen, "Calculating Resonance Frequencies of Peforated Panels ", Journal of Sound and Vibration, Vol. 196, No. 4, pp. 387-399, 1996.
[9]C. G. Boay, "Free Vibration of Laminated Composite Plates with a Central Hole", Composite Structures, Vol. 35, pp. 357-368, 1996.
[10]D. R. Avalos, H. A. Larrondo and P. A. A. Laura, "Analysis of Vibrating Rectangular Anisotropic Plate with Free-Edge Holes", Journal of Sound and Vibration, Vol. 222, pp. 691–695, 1999.
[11]T. Sakiyama, M. Huang, H. Matsuda and C. Morita, "Free Vibration of Orthotropic Square Plates with a Square Hole", Journal of Sound and Vibration, Vol. 259, pp. 63–80, 2003.
[12]F. Zhang, A. J. Kassab and D. W. Nicholson, "A Boundary Element Solution of an Inverse Elasticity Problem and Applications to Determining Residual Stress and Contact Stress", International Journal of Solids Structures, Vol. 34, No. 16, pp. 2073-2086, 1997.
[13]P. D. Cha and W. Gu, "Model Updating Using an Incomplete Set of Experimental Modes", Journal of Sound and Vibration, Vol. 233, No. 4, pp. 587-600, 2000.
[14]T. C. Lai and K. H. Ip, "Parameter Estimation of Orthotropic Plates by Bayesian Sensitivity Analysis", Composite Structures, Vol. 34, pp. 29-42, 1996.
[15]K. H. Ip, P. C. Tse, and T. C. Lai, "Material Characterization for Orthotropic Shells Using Modal Analysis and Rayleigh-Ritz Methods", Composites,Part B, Vol. 29B, pp. 397-409, 1998.
[16]J. Cunha and J. Piranda, "Application of Model Updating Techniques in Dynamics for the Identification of Elastic Constants
of Composite Materials", Composites,Part B, Vol. 30, pp. 79-85, 1999.
[17]林浩妃, "液晶顯示面板振動行為之探討", 國立清華大學動力機械工程學系碩士論文, 2004.
[18]R. M. Lin and D. J. Ewins, "Model updating using FRF data", Proceedings of the 15th International Seminar on Modal Analysis, pp. 141-162, 1990.
[19]W. J. Visser and M. Imregun, "A technique to update finite element models using frequentcy response data", Proceedings 9th IMAC, pp. 462-468, 1991.
[20]M. I. Friswell and J. E. Mottershead, " Model Updating In Structural Dynamics: A Survey", Journal of Sound and Vibration, Vol. 167, No. 2, pp. 347-375, 1993.
[21]E. Dascotte and J. Strobbe, " Updating Finite Element Models using FRF Correlation Functions", Proceedings of the 17th International Modal Analysis Conference, pp. 505-510, 1999.
[22]林淑瑜, "含圓孔複合材料平板振動之實驗研究", 國立清華大學動力機械工程學系碩士論文, 1995.
[23]劉子源, "邊界條件與表面元件排列對印刷電路板振動行為影響之探討", 國立清華大學動力機械工程學系碩士論文, 2001.
[24]"Spectrum Analyzer PW-145B", 譜威科技股份有限公司, 台灣.
[25]"Signal Doctor", Version 1.75, 譜威科技股份有限公司, 台灣.
[26]"The STAR System", Version 6.2, Structural Measurement System (SMS), A GenRed Product Line, Canada, 2001.
[27]蘇志偉, "含缺陷複材平板之非破壞性檢測與振動分析", 國立清華大學動力機械工程學系碩士論文, 2003.