研究生: |
戴家鴻 Tai, Chia-Hung |
---|---|
論文名稱: |
一個採用次階式概念之十位元每秒取樣兩億五千萬次混合型連續漸進式類比數位轉換器 A 10-bit 250-MS/s Hybrid SAR ADC with Sub-ranging Concept |
指導教授: |
朱大舜
Chu, Ta-Shun 彭朋瑞 Peng, Pen-Jui |
口試委員: |
王毓駒
Wang, Yu-Jiu 吳仁銘 Wu, Jen-Ming |
學位類別: |
碩士 Master |
系所名稱: |
電機資訊學院 - 電機工程學系 Department of Electrical Engineering |
論文出版年: | 2023 |
畢業學年度: | 111 |
語文別: | 英文 |
論文頁數: | 100 |
中文關鍵詞: | 連續漸進式類比數位轉換器 、訊號中和技術 、冗餘技術 、相關反向切換技術 、反切電容切換演算法 |
外文關鍵詞: | SAR ADC, Neutralization technique, Redundancy technique, Correlated Reversed Switching, Switchback Algorithm |
相關次數: | 點閱:4 下載:0 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
無線通訊技術的快速發展大幅改善人類的生活模式,舉例來說,名聞遐邇的5G通訊技術提供更快的資料傳輸速度及更低的延遲,應用層面廣泛。以通訊信號傳輸來說,必不可少的正是類比數位轉換器,伴隨著半導體製程的演進,為了達成中高解析度及中速的目標,熱門的選擇無疑是連續漸進式類比數位轉換器。
一個採用次階式概念的高速混合型連續漸進式類比數位轉換器實現於此論文中,用近似次階式的電路架構為基礎,運用多個比較器,再加上錯誤容忍的技巧,使得速度可以有效的提升。其中,錯誤容忍的演算法是採用二進位重組的方式,它不只可以用來容忍電容陣列切換後,尚未穩定就進行下一次比較而產生的錯誤,還可以容忍不同比較器之間不匹配的錯誤。另外,此電路也採納回切已切換電容的方法,以補償電容不匹配問題。
本論文的成果是採用台積電65奈米CMOS標準製程,此連續漸進式類比數位轉換器在1.2伏特下操作,輸入訊號的峰對峰值為2.16伏特,是一個十位元每秒取樣兩億五千萬次的設計。當輸入訊號頻率接近奈奎斯特頻率時,模擬結果是: 平均功率消耗是2.867 mW,有效位元數是9.75位元。
The rapid development of wireless communication technology has greatly improved people's lifestyles. For example, the widely acclaimed 5G communication technology provides faster data transmission speed and lower latency in broad applications. Among them, the analog-to-digital converter (ADC) is an essential circuit in communication systems. With the evolution of semiconductor processes, the successive approximation register (SAR) ADC has been a prevalent option for medium-speed and medium-to-high-resolution applications.
The presented high-speed SAR ADC utilizes multiple comparators in a structure similar to a sub-ranging architecture and error-tolerant technique to effectively improve the speed. Among them, the error-tolerant technique uses the binary-scaled recombination search algorithm, which can not only tolerate the incomplete settling errors but also the offset errors between different comparators. Additionally, this circuit also employs the correlated reversed switching (CRS) technique to compensate for capacitor mismatch.
This work, a 10-bit 250-MS/s hybrid SAR ADC, is implemented in a TSMC 65-nm CMOS technology, with an operating voltage of 1.2 V and an input signal with peak-to-peak voltage (Vp-p) of 2.16 V. Near the Nyquist frequency, the simulation results present that the simulated ENOB is 9.75 bits with the average power consumption of 2.867 mW.
[1] Y. Chiu, B. Nikolic and P. R. Gray, "Scaling of analog-to-digital converters into ultra-deep-submicron CMOS," Proceedings of the IEEE 2005 Custom Integrated Circuits Conference, 2005., San Jose, CA, USA, 2005, pp. 375-382.
[2] P. Harpe, "Successive Approximation Analog-to-Digital Converters: Improving Power Efficiency and Conversion Speed," in IEEE Solid-State Circuits Magazine, vol. 8, no. 4, pp. 64-73, Fall 2016.
[3] J. Liu, Z. Luo and X. Xiong, "Low-Resolution ADCs for Wireless Communication: A Comprehensive Survey," in IEEE Access, vol. 7, pp. 91291-91324, 2019.
[4] Z. Tan, C. -H. Chen, Y. Chae and G. C. Temes, "Incremental Delta-Sigma ADCs: A Tutorial Review," in IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 67, no. 12, pp. 4161-4173, Dec. 2020.
[5] M. F. Wagdy, "Effect of ADC quantization errors on some periodic signal measurements," in IEEE Transactions on Instrumentation and Measurement, vol. IM-36, no. 4, pp. 983-989, Dec. 1987.
[6] R. H. Walden, "Analog-to-digital converter survey and analysis," in IEEE Journal on Selected Areas in Communications, vol. 17, no. 4, pp. 539-550, April 1999.
[7] B. Razavi, "The Flash ADC [A Circuit for All Seasons]," in IEEE Solid-State Circuits Magazine, vol. 9, no. 3, pp. 9-13, Summer 2017.
[8] C. -C. Liu, S. -J. Chang, G. -Y. Huang and Y. -Z. Lin, "A 10-bit 50-MS/s SAR ADC With a Monotonic Capacitor Switching Procedure," in IEEE Journal of Solid-State Circuits, vol. 45, no. 4, pp. 731-740, April 2010.
[9] S. -W. M. Chen and R. W. Brodersen, "A 6-bit 600-MS/s 5.3-mW Asynchronous ADC in 0.13-μm CMOS," in IEEE Journal of Solid-State Circuits, vol. 41, no. 12, pp. 2669-2680, Dec. 2006.
[10] M. van Elzakker, E. van Tuijl, P. Geraedts, D. Schinkel, E. A. M. Klumperink and B. Nauta, "A 10-bit Charge-Redistribution ADC Consuming 1.9 μW at 1 MS/s," in IEEE Journal of Solid-State Circuits, vol. 45, no. 5, pp. 1007-1015, May 2010.
[11] G. -Y. Huang, S. -J. Chang, C. -C. Liu and Y. -Z. Lin, "10-bit 30-MS/s SAR ADC Using a Switchback Switching Method," in IEEE Transactions on Very Large Scale Integration (VLSI) Systems, vol. 21, no. 3, pp. 584-588, March 2013.
[12] B. Razavi, "The StrongARM Latch [A Circuit for All Seasons]," in IEEE Solid-State Circuits Magazine, vol. 7, no. 2, pp. 12-17, Spring 2015.
[13] H. -Y. Tai, Y. -S. Hu, H. -W. Chen and H. -S. Chen, "11.2 A 0.85fJ/conversion-step 10b 200kS/s subranging SAR ADC in 40nm CMOS," 2014 IEEE International Solid-State Circuits Conference Digest of Technical Papers (ISSCC), San Francisco, CA, USA, 2014, pp. 196-197.
[14] L. Kull et al., "A 3.1mW 8b 1.2GS/s single-channel asynchronous SAR ADC with alternate comparators for enhanced speed in 32nm digital SOI CMOS," 2013 IEEE International Solid-State Circuits Conference Digest of Technical Papers, San Francisco, CA, USA, 2013, pp. 468-469.
[15] Tao Jiang, Wing Liu, F. Y. Zhong, Charlie Zhong and P. Y. Chiang, "Single-channel, 1.25-GS/s, 6-bit, loop-unrolled asynchronous SAR-ADC in 40nm-CMOS," IEEE Custom Integrated Circuits Conference 2010, San Jose, CA, 2010, pp. 1-4.
[16] W. Liu, P. Huang and Y. Chiu, "A 12b 22.5/45MS/s 3.0mW 0.059mm2 CMOS SAR ADC achieving over 90dB SFDR," 2010 IEEE International Solid-State Circuits Conference - (ISSCC), San Francisco, CA, USA, 2010, pp. 380-381.
[17] W. Liu, P. Huang and Y. Chiu, "A 12-bit 50-MS/s 3.3-mW SAR ADC with background digital calibration," Proceedings of the IEEE 2012 Custom Integrated Circuits Conference, San Jose, CA, USA, 2012, pp. 1-4.
[18] A. H. Chang, H. -S. Lee and D. Boning, "A 12b 50MS/s 2.1mW SAR ADC with redundancy and digital background calibration," 2013 Proceedings of the ESSCIRC (ESSCIRC), Bucharest, Romania, 2013, pp. 109-112.
[19] T. Ogawa, H. Kobayashi, M. Hotta, Y. Takahashi, Hao San and Nobukazu Takai, "SAR ADC algorithm with redundancy," APCCAS 2008 - 2008 IEEE Asia Pacific Conference on Circuits and Systems, Macao, China, 2008, pp. 268-271.
[20] C. -C. Liu et al., "A 10b 100MS/s 1.13mW SAR ADC with binary-scaled error compensation," 2010 IEEE International Solid-State Circuits Conference - (ISSCC), San Francisco, CA, USA, 2010, pp. 386-387.
[21] C. -C. Liu, C. -H. Kuo and Y. -Z. Lin, "A 10 bit 320 MS/s Low-Cost SAR ADC for IEEE 802.11ac Applications in 20 nm CMOS," in IEEE Journal of Solid-State Circuits, vol. 50, no. 11, pp. 2645-2654, Nov. 2015.
[22] C. -H. Hou, S. -J. Chang, H. -S. Wu, H. -J. Hu and E. -Z. Cun, "An 8-bit 400-MS/s calibration-free SAR ADC with a pre-amplifier-only comparator," 2017 International Symposium on VLSI Design, Automation and Test (VLSI-DAT), Hsinchu, Taiwan, 2017, pp. 1-4.
[23] B. Razavi, "The Bootstrapped Switch [A Circuit for All Seasons]," in IEEE Solid-State Circuits Magazine, vol. 7, no. 3, pp. 12-15, Summer 2015.
[24] B. Razavi, "The Design of a Bootstrapped Sampling Circuit [The Analog Mind]," in IEEE Solid-State Circuits Magazine, vol. 13, no. 1, pp. 7-12, Winter 2021.
[25] G. Huang and P. Lin, "A fast bootstrapped switch for high-speed high-resolution A/D converter," 2010 IEEE Asia Pacific Conference on Circuits and Systems, Kuala Lumpur, Malaysia, 2010, pp. 382-385.
[26] S. -H. Wan et al., "A 10-bit 50-MS/s SAR ADC with techniques for relaxing the requirement on driving capability of reference voltage buffers," 2013 IEEE Asian Solid-State Circuits Conference (A-SSCC), Singapore, 2013, pp. 293-296.
[27] L. Sumanen, M. Waltari and K. A. I. Halonen, "A 10-bit 200-MS/s CMOS parallel pipeline A/D converter," in IEEE Journal of Solid-State Circuits, vol. 36, no. 7, pp. 1048-1055, July 2001.
[28] S. Jiang, M. A. Do, K. S. Yeo and W. M. Lim, "An 8-bit 200-MSample/s Pipelined ADC With Mixed-Mode Front-End S/H Circuit," in IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 55, no. 6, pp. 1430-1440, July 2008.
[29] P. Harpe, Y. Zhang, G. Dolmans, K. Philips and H. De Groot, "A 7-to-10b 0-to-4MS/s flexible SAR ADC with 6.5-to-16fJ/conversion-step," 2012 IEEE International Solid-State Circuits Conference, San Francisco, CA, USA, 2012, pp. 472-474.
[30] B. Razavi, "The Design of a Comparator [The Analog Mind]," in IEEE Solid-State Circuits Magazine, vol. 12, no. 4, pp. 8-14, Fall 2020.
[31] P. Nuzzo, F. De Bernardinis, P. Terreni and G. Van der Plas, "Noise Analysis of Regenerative Comparators for Reconfigurable ADC Architectures," in IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 55, no. 6, pp. 1441-1454, July 2008.
[32] P. M. Figueiredo and J. C. Vital, "Kickback noise reduction techniques for CMOS latched comparators," in IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 53, no. 7, pp. 541-545, July 2006.
[33] F. van der Goes et al., "11.4 A 1.5mW 68dB SNDR 80MS/s 2× interleaved SAR-assisted pipelined ADC in 28nm CMOS," 2014 IEEE International Solid-State Circuits Conference Digest of Technical Papers (ISSCC), San Francisco, CA, USA, 2014, pp. 200-201.
[34] J. -H. Tsai et al., "A 0.003 mm2 10 b 240 MS/s 0.7 mW SAR ADC in 28 nm CMOS With Digital Error Correction and Correlated-Reversed Switching," in IEEE Journal of Solid-State Circuits, vol. 50, no. 6, pp. 1382-1398, June 2015.
[35] E. -Z. Cun, S. -J. Chang , "A 10-bit 300-MS/s Successive-Approximation Analog-to-Digital Converter with a Pre-amplifier-only Comparator," in National Cheng Kung University Master's Thesis (Department of Electrical Engineering), January 2019.