軸向耦合結構熱陰極射頻電子槍之設計與分析

簡易檢索 / 詳目顯示

回結果列表

研究生：	魏子喻 Wei, Zih-Yui
論文名稱：	軸向耦合結構熱陰極射頻電子槍之設計與分析 Design and Analysis of a Thermionic Cathode Radio Frequency Electron Gun with On-axis Coupled Structure
指導教授：	柳克強 Leou, Keh-Chyang 劉偉強 Lau, Wai-Keung
口試委員:	張存續柳克強劉偉強李安平
學位類別：	碩士 Master
系所名稱：	理學院 - 先進光源科技學位學程 Degree Program of Science and Technology of Synchrotron Light Source
論文出版年：	2013
畢業學年度：	101
語文別：	英文
論文頁數：	136
中文關鍵詞：	電子槍、軸向耦合、射頻、熱陰極、光注射器、加速器
外文關鍵詞：	RF Gun, On-axis Coupled, Radio Frequency, Thermionic Cathode, Photo Injector, Accelerator
相關次數：	點閱：2 下載：0
分享至:	分享至facebook 分享至twitter

查詢本校圖書館目錄查詢臺灣博碩士論文知識加值系統勘誤回報

Abstract

Thermionic-cathode radio-frequency electron gun (RF gun) has been a compact electron source of accelerators for more than two decades. In an RF gun, electrons pulled out from the cathode by the high gradient field setup in its microwave cavity are rapidly accelerated to relativistic energy such that space charge effects are less significant. Motivated by the need of a high quality electron source for the NSRRC ultrashort beam facility, we studied a 2998 MHz, 1/2+1/2+1 cell, thermionic cathode RF gun with on-axis coupled structure (OCS RF gun). OCS RF gun features simplicity of frequency tuning during fabrication due to its axial symmetry. We started with circuit analysis that provides a reliable model through the investigation. Microwave properties and electron beam characteristics of designed OCS RF gun has been evaluated by 2D simulations of SUPERFISH and PARMELA as well as 3D simulations of HFSS and CST-PS. Operating parameters are optimized to obtain a 2.5 MeV electron beam with quasi-linear energy chirp that allows aggressive bunch compression in the RF linac located downstream after proper beam selection. We have also investigated power distribution of back-streamed electrons that eventually lost onto the surface of thermionic cathode. A prototype of the designed OCS RF gun structure has been fabricated for low power microwave test. Measured frequencies and longitudinal electric field profile of the cavity structure agree well with the results predicted in the simulation studies.

Abstract

Contents

Abstract             i
Acknowledgement      ii
List of Figure     viii
List of Table     xv 

Chapter 1    Introduction
1.1  Background    1
1.1.1    Brief History    1
1.1.2    The NSRRC Ultrashort Beam Facility    2
1.1.3    The Side-coupled Structure Thermionic RF Gun at NSRRC    3
1.2  On-Axis Coupled Structure RF Gun    5
1.3  Research Purpose and Methodology    6

Chapter 2    Principles of RF Electron Gun
2.1  Pillbox Cavity from Cylinder Waveguide    8
2.2  Parameters of an Accelerator Cavity    12
2.2.1    Energy Gain and Transit Time Factor    12
2.2.2    Cavity Losses and Shut Impedance    13
2.2.3    The Quality Factor    14
2.2.4    Equivalent Circuit    15
2.3  RF Electron Gun    16
2.3.1    Mechanism    16
2.3.2    Coupled Cavity Modes    17
2.4  Beam Dynamics    19
2.4.1    The Emittance    19
2.4.2    RF Acceleration    21
2.4.3    F Effect on Transverse Phase Space    23
2.4.4    RF Effect on Longitudinal Phase Space    24
2.4.5    Space Charge Effect    26

Chapter 3    Literature Review
3.1  The OCS gun designed by KHI    28
3.1.1    Simulation Results of the OCS gun designed by KHI    29
3.1.2    Measurement Results of the OCS gun designed by KHI    33
3.2  The OCS type RF gun designed by MAX-Lab    36

Chapter 4    Design and Simulations of Tuning
4.1  Design Specifications    40
4.2  Circuit Analysis of Three-cell Coupled Cavities    42
4.2.1    The Equivalent RLC Circuit    42
4.2.2    Resonant Frequencies    45
4.2.3    Coupling Coefficients between Cavity Cells    47
4.2.4    Field Ratio    48
4.2.5    Input Coupling    51
4.2.6    The Special Case for π/2-mode    53
4.3  Simulation Tools    55
4.3.1    SUPERFISH    55
4.3.2    PARMELA    55
4.3.3    HFSS and CST PS for 3D Simulation    56
4.4  SUPERFISH Simulations    57
4.4.1     Convergence Test by a Pillbox Cavity    57
4.4.2    Dimension of the Structure    58
4.4.3    Frequency Tuning    59
4.4.4    Field Ratio Tuning    60
4.4.5    Mode Separation    61
4.4.6    Microwave Properties after Tuned in SUPERFISH    62
4.5  HFSS Simulations    63
4.5.1    Convergence Test and Mesh Settings    63
4.5.2    Optimization of Mode Separation    64
4.5.3    Asymmetric Structure Module    66
4.5.4    Tuning and Results    68

Chapter 5    Electron Beam Properties
5.1  PARMELA Simulations    73
5.1.1    Beam Properties of Designed OCS Gun    74
5.1.2    Comparisons of the OCS and SCS type RF Guns of NSRRC    76
5.2  CST PS Simulations    89
5.2.1    Output Beam Dynamics of the OCS Gun of NSRRC    90
5.2.2    Beam Dynamics of Back-Streamed Particles    93
5.2.3    Back-bombardment of the OCS RF Gun in different Field Ratio    95
5.3  Summary of Beam Properties    97

Chapter 6    Fabrication & Microwave Measurement
6.1  Fabrication of the OCS Gun of NSRRC    99

6.2  Principles of Measurement- Quality Factor and Field Distribution    101
6.2.1    Impedance Method for Determination of Quality Factor    101
6.2.2    Bead-Pull Method for Determination of On-axis Field Distribution    103
6.3  Results of Microwave Cold Test    104
6.3.1    Measured Resonant Frequencies and Tuner Test    104
6.3.2    Measured On-axis Field Distribution    105
6.3.3    Quality Factor and Input Coupling    106

Chapter 7    Conclusions    108


Appendix A     Derivations and Formulae
A.1    Beam Dynamics    108
A.2    Circuit Model for Tuning an OCS gun    112
A.3    Solutions of Single Variable Cubic Function    114

Appendix B     Programming Codes
B.1    MATLAB Codes for Computing Resonant Frequencies    115
B.2    SUPERFISH Codes of the well-tuned NSRRC OCS RF Gun    116
B.3    MATLAB Codes for Evaluating ω-ωβ Plot    117
B.4    PARMELA Codes    118

Appendix C     Tuning Procedures
C.1    2D Tuning by SUPERFISH    119
C.2    3D Tuning by HFSS    122

Appendix D     Simulation Setups
D.1    Setups of Eigen-mode Calculations in HFSS    126
D.2    Setups of Driven-mode Calculations in HFSS    127
D.3    Setups of CST PS Simulation    128

Appendix E     Layout of the OCS RF gun of NSRRC    129

References            133


















List of Figure

Figure 1.1    Setup of the NSRRC ultrashort beam facility.    2
Figure 1.2    Layouts of the 2998MHz thermionic RF electron gun of NSRRC.    3
Figure 1.3    The side-coupled structure, standing wave, thermionic cathode RF gun optimized by NSRRC and its field distribution when operating in π/2-mode, 2998MHz.    4
Figure 1.4    Distributions of the 2.5 MeV electron beam at gun exit with peak fields of 32MV/m and 75 MV/m at half-cell and full-cell, respectively.    4
Figure 1.5    The Schematics of an OCS-gun.    5
Figure 1.6    Research flow diagrams for design and analysis of an RF gun.    7

Figure 2.1    A pillbox cavity with length d and radius a.    10
Figure 2.2    Fields inside a TM010 mode pillbox cavity.    11
Figure 2.3    Equivalent circuit of a single cavity resonator.    15
Figure 2.4    The equivalent circuit of the cavity chain coupled by nth identical cavities.    18
Figure 2.5    Schematics of the RF gun structure for n+1/2-cell.    21

Figure 3.1    Cross section schematics of OCS type RF gun proposed by KHI.     28
Figure 3.2    Emittance of output beam and back bombardment power as functions of field ratio e_b calculated by EMSYS.    30
Figure 3.3    Energy spectra of back-bombarding beam. Dotted line: e_b=1.0; Solid line: e_b=2.6.    30
Figure 3.4   Radial distribution of back-bombarding power density on the cathode surface.             31
Figure 3.5    Energy spectrum at the RF gun exit. The energy spread (FWHM) is less than 30keV.     31
Figure 3.6    Simulated energy distributions versus time at the gun exit in a macropulse with different peak accelerating field applied in to the RF gun designed by KHI.    32
Figure 3.7    Time dependent energy distribution of the RF gun designed by KHI with 65MV/m maximum accelerating field.    32
Figure 3.12    Graph of KHI’s OCS type RF gun system installed to the FEL device.    35
Figure 3.13    The OCS type RF gun designed by MAX-lab.    37
Figure 3.14    The field contour of the OCS type RF gun designed by MAX-lab, simulated by SUPERFISH.    37
Figure 3.15    Accelerating fields on beam axis at π/2-mode (left) and at 0-mode (right.).    37
Figure 3.16    Transverse phase space distributions at gun exit with Icathode=0mA (left), Icathode=100mA (middle) and Icathode=600mA (right).    38
Figure 3.17    The energy distribution at gun exit with Icathode=0mA (left), Icathode=100mA (middle) and Icathode=600mA (right).    38
Figure 3.18    The layout of the OCS type thermionic RF gun designed by MAX-lab with improved cooling in between the cells and around the cathode    39

Figure 4.1    Equivalent circuit of three-cell coupled cavity chain.    42
Figure 4.2    Results of convergence test of a 2998 MHz pillbox cavity.    57
Figure 4.3    The initial dimension setup of the OCS gun of NSRRC.    58
Figure 4.4    Field magnitude distribution and contour of coupling-cell (left) and full-cell (right) after tuned to 2998.09 and 2998.05 MHz, respectively. (SUPERFISH)            59
Figure 4.5    Field magnitude distribution and contour after tuned to 2998 MHz, eb=1. (SUPERFISH)    59
Figure 4.6    On-axis field magnitude distribution and contour of tuned OCS gun of NSRRC after tuned. (SUPERFISH)    60
Figure 4.7    Frequency sweep of the OCS gun of NSRRC after tuned. (SUPERFISH)    61
Figure 4.8    The field contour and on-axis field distribution of zero-mode (left) and π-mode (right). (SUPERFISH)    61
Figure 4.9    The mesh cross section view of the OCS RF gun of NSRRC. (HFSS)    63
Figure 4.10    Result of convergence test of the OCS RF gun of NSRRC. (HFSS)    63
Figure 4.11     Mode test of the OCS RF gun of NSRRC after tuned by SUPERFISH.    65
Figure 4.12    Mode test of the OCS gun of NSRRC with optimized mode separation and result from the theoretical evaluations.    65
Figure 4.13    Field patterns of the OCS RF gun of NSRRC. (eigen-mode, HFSS)    65
Figure 4.14    Schematics (left) and HFSS module (right) of the coupling structure, waveguide and pumping pipe in cross section view.    66
Figure 4.15    The side, top and front view of the OCS type RF gun of NSRRC with external structures.    67
Figure 4.16    The mesh spacing of HFSS simulations for tuning the OCS gun of NSRRC.    67
Figure 4.17    Field patterns of the well-tuned OCS type RF gun of NSRRC simulated by HFSS (Driven mode).    70
Figure 4.18    S11 parameter spectrums. (HFSS)    70
Figure 4.19    On-axis electric field distribution of tuned OCS gun of NSRRC. (HFSS)    71
Figure 4.20    VSWR and input coupling of the tuned OCS RF gun of NSRRC. (HFSS)    71
Figure 4.21    Smith chart of the tuned OCS RF gun of NSRRC. (HFSS)    71
Figure 4.22    On-axis field distribution of the tube of tuned OCS gun of NSRRC.(HFSS)    72
Figure 4.23    On-axis field distribution of drift tube of tuned OCS gun of NSRRC.(HFSS)    72
Figure 4.24    On-axis field distribution of pumping pipe of tuned OCS gun of NSRRC.(HFSS)        72
Figure 5.1    Energy distribution at exit of OCS RF gun of NSRRC with different accelerating gradients.    74
Figure 5.2    Energy distribution at exit of OCS RF gun of NSRRC.    75
Figure 5.3    Energy spectrum at exit of OCS RF gun of NSRRC.    75
Figure 5.4    Particle number distribution at exit of OCS RF gun of NSRRC.    75
Figure 5.5    Real space and phase space distribution at exit of OCS RF gun of NSRRC.    76
Figure 5.6    On-axis field distribution of the OCS RF gun with different field ratio.    77
Figure 5.7    On-axis field distribution of the SCS RF gun with different field ratio.    77
Figure 5.8    Schematics of the definition of top 10% energy particles    77
Figure 5.9    Distributions of particle loss and output charge in different field ratio of the OCS RF gun of NSRRC.    79
Figure 5.10    Distributions of the r.m.s. transverse emittance and the r.m.s. transverse emittance of top 10% energy particles in different field ratio of the OCS RF gun of NSRRC.    79
Figure 5.11    Real space distribution of electrons at the exit of the OCS RF gun of NSRRC with different field ratio.    80
Figure 5.12    Phase space distribution of electrons at the exit of the OCS RF gun of NSRRC with different field ratio.    80
Figure 5.13    Longitudinal energy distributions at the exit of the OCS RF gun of NSRRC with different field ratio.    81
Figure 5.14    Phase spaces of selected top 10% energy particles at the exit of the OCS RF gun of NSRRC with different field ratio.    81
Figure 5.15    Distributions of particle loss and output charge in different field ratio of the SCS RF gun of NSRRC.    83
Figure 5.16    Distributions of the r.m.s. transverse emittance and the r.m.s. transverse emittance of top 10% energy particles in different field ratio of the SCS RF gun of NSRRC.    83
Figure 5.17    Real space distribution of electrons at the exit of the SCS RF gun of NSRRC with different field ratio.    84
Figure 5.18    Phase space distribution of electrons at the exit of the SCS RF gun of NSRRC with different field ratio.    84
Figure 5.19    Longitudinal energy distributions at the exit of the SCS RF gun of NSRRC with different field ratio.    85
Figure 5.20    Phase spaces of selected top 10% energy particles at the exit of the SCS RF gun of NSRRC with different field ratio.    85
Figure 5.21    Comparison of particle losses and output charge of OCS and SCS RF gun.    87
Figure 5.22    Comparison of output charge of top 10% energy particles of OCS and SCS gun.    88
Figure 5.23    Comparison of emittance of OCS and SCS RF gun.    88
Figure 5.24    Comparison of emittance of top 10% of energy particles of OCS and SCS RF gun.    88
Figure 5.25    A cross snapshot of the electron beam accelerating in the thermionic OCS RF gun of NSRRC.    89
Figure 5.26    Electron distributions at exit of the OCS RF gun of NSRRC. (CST PS)    90
Figure 5.27    Energy spectrum at exit of the OCS RF gun of NSRRC. (CST PS)    90
Figure 5.28    Energy spectrum in the gun structure at the moment that first bunch just arrives the gun exit. (CST PS)    91
Figure 5.29    Energy spectrum in the gun structure at the moment that second bunch just arrives the gun exit. (CST PS)    91
Figure 5.30    Distributions of electron beam position and energy of the OCS RF gun of NSRRC. The particle number of simulation is not large enough so that the stepped distribution of beam takes place in this figure.    92
Figure 5.31    The back-bombarded current distribution on cathode surface.    93
Figure 5.32    Energy spectrum of back-bombarded electrons on cathode surface.    94
Figure 5.33    The back-bombarded electron distribution on cathode surface.    94
Figure 5.34     Back-bombarded power and charge within different field ratio.    95
Figure 5.35    Energy spectrum of back-bombardment within different field ratio.    96

Figure 6.1    Experiment setup of the cold test for the OCS gun of NSRRC.    98
Figure 6.2    Layout cross section view of the OCS gun prototype of NSRRC.    99
Figure 6.3    Resonant frequencies response of the OCS gun of NSRRC when R_full varies.            100
Figure 6.4    Input coupling and field ratio versus R_fullof the OCS gun of NSRRC.    100
Figure 6.5    Equivalent circuit for the coupling system of RF source and cavity resonator.            101
Figure 6.6    Measured and simulated (HFSS) S_11 parameter of prototype.    104
Figure 6.7    Measured and simulated (HFSS) frequency response versus p of the prototype.        105
Figure 6.8    Simulated (HFSS) VSWR and field ratio versus p of the prototype.    105
Figure 6.9    Measured and simulated (HFSS) on-axis field distribution.    106

Figure C.1    The fitted tuning curve of the coupling-cell.    119
Figure C.2    The fitted tuning curve of the full-cell.    120
Figure C.3    The response of gun frequency with varying R_half.    120
Figure C.4    The fitted tuning curve of the gun with varying R_half.    120
Figure C.5    Field balance tuning curves when varying the radius of iris between coupling- and full- cell.    121
Figure C.6    Field balance tuning curves when varying R_full.    121
Figure C.7    Parameter sweep results of ΔR_f=-0.3~0 mm in tuning step 1.    123
Figure C.8    Parameter sweep results of ΔR_f=-0.3~-0.2 mm in tuning step 1.    123
Figure C.9    Parameter sweep results of Δs=0~+4.5 mm in tuning ne step 2.    124
Figure C.10    Parameter sweep results of ΔR_f=-0.25~-0.15 mm in tuning step 3.    124
Figure C.11    Parameter sweep results of R_(h,cpl)=-0.05~0.05 mm in tuning step 4.    125

Figure D.2    The solution setup of the convergence test in eigen-mode of HFSS simulation.            126
Figure D.1    Meshing settings of the gun structure in eigen-mode of HFSS simulation.    126
Figure D.3    The mesh settings in driven-mode of HFSS simulation.    127
Figure D.4    Setups of driven-mode calculations in HFSS.    127
Figure D.5    Setups of particle source (left) and meshing (right) in CST PS.    128
Figure D.6    Setups of the PIC solver parameters in CST PS.    128










List of Table

Table 1.1    Designed parameters of the NSRRC ICS experiment.    2

Table 2.1    Quantities of cylinder waveguide.    9
Table 2.2    Values of x_mn.    10

Table 3.1    Optimized parameters of the OCS gun designed by KHI.    29
Table 3.2    The desired parameters of the OCS type thermionic RF gun designed by MAX-lab.    36
Table 3.3    Performance of OCS gun designed by MAX-lab, simulated by SUPERFISH.    36

Table 4.1    Desired Parameters of the OCS Type Thermionic RF Gun of NSRRC.    40
Table 4.2    Microwave parameters of the OCS gun designed by KHI.    46
Table 4.3    The result of evaluating resonant frequencies.    46
Table 4.4    Microwave properties of tuned OCS gun of NSRRC. (SUPERFISH)    62
Table 4.5    Microwave properties of individual cells of tuned OCS gun of NSRRC. (SUPERFISH)    62
Table 4.6    Resonant frequencies and quality factors calculated by HFSS (eigen-mode).    64
Table 4.7    Micorwave parameters desired and achieved. (Drievn-mode, HFSS)    69

Table 5.1    Input parameters of PARMELA calculation.    73
Table 5.2    Parameter Comparison of OCS and SCS RF gun under designed circumstances.        87
Table 5.2    Beam Properties of the OCS RF gun of NSRRC calculated by PARMELA.    97
Table 5.3    Bam Properties of the OCS RF gun of NSRRC calculated by CST PS    97

                                

[1] G. A. Westenskow and J. M. J. Madey, "Microwave Electron-Gun," Laser and Particle Beams, vol. 2, pp. 223-225, 1984.

[2] S. V. Benson, J. M. Madey, J. Schultz, M. Marc, W. Wadensweiler, G. A. Westenskow, et al., "The Stanford Mark III infrared free electron laser," Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 250, pp. 39-43, 1986.

[3] J. Fraser, R. Sheffield, E. Gray, P. Giles, R. Springer, and V. Loebs, "Photocathodes in accelerator applications," in Proc. of the 1987 IEEE Particle Aceelerator Conf, 1987, pp. 1705-1709.

[4] C. McKee and J. M. Madey, "Computer simulation of cathode heating by back-bombardment in the microwave electron gun," Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 296, pp. 716-719, 1990.

[5] T. Kii, T. Yamaguchi, R. Ikeda, Z.-W. Dong, K. Masuda, H. Toku, et al., "Experiment and analysis on back-bombardment effect in thermionic RF gun," Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 475, pp. 588-592, 2001.

[6] J. Hwang, A. Lee, J. Chen, W. Lau, T. Wu, and N. Huang, "A LOW ENERGY THERMIONIC RF GUN LINAC FOR ULTRASHORT ELECTRON BEAM."

[7] W. Lau, J. Chen, J. Hwang, A. Lee, C. Liang, T. Wu, et al., "CONSTRUCTION OF A THERMIONIC RF GUN LINAC SYSTEM FOR ULTRASHORT ELECTRON PULSE GENERATION."

[8] N. Huang, W. Lau, C. Liang, A. Lee, W. Cheng, and S. Yang, "Driver linac design for a femtosecond head-on inverse Compton scatteringX-ray source," Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 637, pp. S76-S79, 2011.
[9] N. Huang, S. Yang, W. Lau, and H. Hama, "Focusing of Ultrashort Electron Bunch for Femtosecond Inverse Compton Scattering X-ray Source," Proceedings of IPAC’10, Kyoto, Japan

[10] M. Borland, "A HIGH-BRIGHTNESS THERMIONIC MICROWAVE ELECTRON GUN," M. Borland, Ed., ed. Stanford Linear Accelerator Center Stanford University, Stanford, CA 94309, 1991.

[11] A. Lee, S. Chang, J. Hwang, W. Lau, C. Liang, G. Luo, et al., "First operation of a thermionic cathode RF gun at NSRRC," in Particle Accelerator Conference, 2007. PAC. IEEE, 2007, pp. 1088-1090.

[12] E. Tanabe, A. Nakayama, F. Oda, and M. Yokoyama, "A NOVEL STRUCTURE OF MULTI-PURPOSE RF GUN," in Proc. 1998 Linear Accel. Conf., Chicago, 1998.

[13] S. Thorin, N. Čutić, F. Lindau, S. Werin, and F. Curbis, "Photocathode operation of a thermionic RF gun," Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 606, pp. 291-295, 2009.

[14] F. Oda, M. Yokoyama, A. Nakayama, and E. Tanabe, "The on axis coupled structure type RF gun," Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 429, pp. 332-335, 1999.

[15] F. Oda, M. Yokoyama, A. Nakayama, H. Koike, and E. Tanabe, "The properties of on-axis coupled structure RF gun," Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 445, pp. 404-407, 2000.

[16] F. Oda, M. Yokoyama, M. Kawai, H. Koike, and M. Sobajima, "Performance of the thermionic RF gun injector for the linac-based IR free electron laser at the FEL-SUT," Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 475, pp. 583-587, 2001.

[17] R. E. Collin, Foundations for Microwave Engineering, 2 ed., 1992.

[18] D. M. Pozar, Microwave Engineering, 3 ed., 2005.

[19] H. Wiedemann, Particle Accelerator Physics, 3 ed., 2007.

[20] M. Reiser, Theory and Design of Charged Particle Beams, 2 ed., 2008.

[21] P. Couffignal, H. Baudrand, and J. Obregon, "Equivalent circuit of a cavity coupled to a feeding line and its dependence on the electric or magnetic nature of output coupling structure," in IEE Proceedings H (Microwaves, Antennas and Propagation), 1992, pp. 221-226.

[22] D. Nagle, E. Knapp, and B. Knapp, "Coupled resonator model for standing wave accelerator tanks," Review of Scientific Instruments, vol. 38, pp. 1583-1587, 1967.
[23] K. J. Kim, "RF AND SPACE-CHARGE EFFECTS IN LASER-DRIVEN RF ELECTRON GUNS," Nuclear Instruments & Methods in Physics Research Section a-Accelerators Spectrometers Detectors and Associated Equipment, vol. 275, pp. 201-218, Feb 1989.

[24] B. Anderberg, Å. Andersson, M. Demirkan, M. Eriksson, L. Malmgren, and S. Werin, "The design of a 3GHz thermionic RF-gun and energy filter for MAX-lab," Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 491, pp. 307-313, 2002.

[25] E. Elafifi, M. Eriksson, D. Kumbaro, F. Lindau, E. Mansten, S. Thorin, et al., "AN ELECTRON GUN TEST STAND TO PREPARE FOR THE MAX IV PROJECT," in Proceedings of IPAC2012, New Orleans, Louisiana, USA.

[26] S. Lal, K. K. Pant, and S. Krishnagopal, "A new two-step tuning procedure for a photocathode gun," Nuclear Instruments & Methods in Physics Research Section a-Accelerators Spectrometers Detectors and Associated Equipment, vol. 592, pp. 180-188, Jul 2008.

[27] S. Lal, K. K. Pant, and S. Krishnagopal, "A novel scaling law relating the geometrical dimensions of a photocathode radio frequency gun to its radio frequency properties," Review of Scientific Instruments, vol. 82, Dec 2011.

[28] K. Halbach, R. F. Holsinger, "SUPERFISH-A COMPUTER PROGRAM FOR EVALUATION OF RF CAVITIES WITH CYLINDRICAL SYMMETRY," 1976.

[29] M.T. Menzcl, H.K. Stokes, Menzcl, User’s Guide for the POISSON/SUPERFISH Group of Codes. LANL, 1987.

[30] http://laacg.lanl.gov/laacg/services/download_sf.phtml

[31] D. Palmer, R. Miller, H. Winick, X. Wang, K. Batchelor, M. Woodle, et al., "Microwave measurements of the BNL/SLAC/UCLA 1.6 cell photocathode RF gun," in Particle Accelerator Conference, 1995., Proceedings of the 1995, 1995, pp. 982-984.

[32] J. Gao, "Analytical determination of the coupling coefficient of waveguide cavity coupling systems," Nuclear Instruments & Methods in Physics Research Section a-Accelerators Spectrometers Detectors and Associated Equipment, vol. 481, pp. 36-42, Apr 2002.

[33] J. Gao, "Analytical Formula for the Coupling Coefficient-Beta of a Cavity - Wave-Guide Coupling System," Nuclear Instruments & Methods in Physics Research Section a-Accelerators Spectrometers Detectors and Associated Equipment, vol. 309, pp. 5-10, Nov 1 1991.

[34] E. L. Ginzton, "Microwave Q measurements in the presence of coupling losses," Microwave Theory and Techniques, IRE Transactions on, vol. 6, pp. 383-389, 1958.

[35] D. Kajfez and E. J. Hwan, "Q-factor measurement with network analyzer," Microwave Theory and Techniques, IEEE Transactions on, vol. 32, pp. 666-670, 1984.

[36] S. Som, S. Seth, A. Mandal, S. Ghosh, and V. E. C. Center, "Bead-pull measurement using phase-shift technique in multi-cell elliptical cavity," Proceedings of IPAC2011 MOPC088, San Sebastián, Spain, 2011.

全文公開日期本全文未授權公開 (校內網路)
全文公開日期本全文未授權公開 (校外網路)

簡易檢索 / 詳目顯示

相關論文