個人化產品為現今消費趨勢，與顏面相關產品的設計，需考量個別臉部幾何與尺寸的差異。本研究使用非接觸式量測技術，取得大量國內年輕女性顏面三維資料，經主成份分析法降維，使用線性與非線性廻歸模型，建立參數與網格頂點之關聯，成功發展人臉參數化模型；能根據使用者少量的臉部特徵尺寸，產生近似之三維人臉幾何。再透過攤平與貼圖映射技術，取得貼圖與模型對應關係，輸出高擬真效果的人臉模型。此外整合五軸力回饋裝置，針對美容彩妝，建立創新的虛擬化妝功能；對於與穿戴合適度相關的客製化商品設計，以自由造型變形，建構可調整之虛擬鏡框模型；並藉由擷取人臉模型幾何，進行高服貼度面膜設計；結合三項客製化功能，開發前瞻性互動式設計介面，提高擬真三維顏面資料附加價值，實現大量客製化概念。

[1] 黃延明，「眼鏡師訓練手冊」，財團法人徐氏基金會，1987。
[2] 楊智凱，「於擴增實境中使用多深度感測器之虛擬鞋品試穿技術」，清華大學工業工程與工程管理學系學位論文，2013。
[3] 吳銓友，「組裝模型中以自由度為基礎之幾何限制條件之研究」，國立台灣大學機械工程學研究所學位論文，2000。
[4] 梁昶煒，「基於力回饋搖桿之虛擬毛筆書寫系統」，交通大學電機與控制工程系所學位論文，2009。
[5] 王法強，耿國華，李康，賀毅岳，「基於特徵點約束的人臉紋理映射」，計算機應用研究，29，2，2012，3509-3511。
[6] 曾浚洋，「用於材質貼圖之三維顏面參數化模型」，清華大學工業工程與工程管理學系學位論文，2013。
[7] 鄭珏珉，「一套衣物搭配的即時互動系統」，國立台灣大學電機資訊學院資訊工程學系碩士論文，2009。
[8] 龍滕科技股份有限公司，http://www.ltech.com.tw/, Accessed June (2014).
[9] 楊攸奕，「基於擴增實境之產品客製化設計：虛擬試穿與網格變形」，國立清華大學工業工程與工程管理學系，碩士論文，2012。
[10] EZface - The Best-Selling Virtual Makeover
http://www.ezface.com/, Accessed July (2014).
[11] Mochimaru, M., and Kouchi, M. “Technologies for the design and retail service of well-fitting eyeglass frames,” Synthesiology-English edition Vol. 1 No. (2008).
[12] Huang, S.H., Yang Y.I., and Chu C.H. “Human-centric design personalization of 3D glasses frame in markerless augmented reality,” Advanced Engineering Informatics 26.1 (2012): 35-45.
[13] Wang, W. C., Chen, Y. H., and Kao, C. Y. “Integrating augmented reality into female hairstyle try-on experience,” Natural Computation (ICNC), 2011 Seventh International Conference on. Vol. 4. IEEE, 2011.
[14] Eisert, P., Rurainsky, J., and Fechteler, P. “Virtual mirror: real-time tracking of shoes in augmented reality environments,” Image Processing, 2007. ICIP 2007. IEEE International Conference on. Vol. 2. IEEE, 2007.
[15] Wang, L., Villamil, R., Samarasekera, S., and Kumar, R. “Magic mirror: a virtual handbag shopping system,” Computer Vision and Pattern Recognition Workshops (CVPRW), 2012 IEEE Computer Society Conference on. IEEE, 2012.
[16] Chen, A., Kao, C. Y., Chen, Y. H., and Wang, W. C. “Applying augmented reality to consumer garment try-on experience,” Transactions on computational science XIII. Springer Berlin Heidelberg, 2011. 169-190.
[17] Eisert, P., and Hilsmann, A. “Realistic virtual try-on of clothes using real-time augmented reality methods,” E-LETTER (2011).
[18] Kjærside, K., Kortbek, K. J., Hedegaard, H., and Grønbæk, K. “ARDressCode: augmented dressing room with tag-based motion tracking and real-time clothes simulation,” Proceedings of the Central European Multimedia and Virtual Reality Conference. 2005.
[19] Bradley, D., Roth, G., and Bose, P. “Augmented reality on cloth with realistic illumination,” Machine Vision and Applications 20.2 (2009): 85-92.
[20] Vlasic D., et al. “Face transfer with multilinear models,” ACM Transactions on Graphics (TOG). Vol. 24. No. 3. ACM, 2005.
[21] Blanz, V., and Vetter T. “A morphable model for the synthesis of 3D faces,” Proceedings of the 26th annual conference on Computer graphics and interactive techniques. ACM Press/Addison-Wesley Publishing Co., 1999.
[22] Mallick, S.P., and Trivedi M. “Parametric face modeling and affect synthesis,” Multimedia and Expo, 2003. ICME'03. Proceedings. 2003 International Conference on. Vol. 1. IEEE, 2003.
[23] Kwok, T. H., Zhang, Y., and Wang, C. C. “Efficient optimization of common base domains for cross parameterization,” Visualization and Computer Graphics, IEEE Transactions on 18.10 (2012): 1678-1692.
[24] Oliver, M. A., and Webster, R. “Kriging: a method of interpolation for geographical information systems,” International Journal of Geographical Information System 4.3 (1990): 313-332.
[25] Watt, A. 3D computer graphics. Addison-Wesley Longman Publishing Co., Inc., 1993.
[26] Lévy, B., Petitjean, S., Ray, N., and Maillot, J. “Least squares conformal maps for automatic texture atlas generation,” ACM Transactions on Graphics (TOG). Vol. 21. No. 3. ACM, 2002.
[27] Sander, P. V., Snyder, J., Gortler, S. J., and Hoppe, H. “Texture mapping progressive meshes,” Proceedings of the 28th annual conference on Computer graphics and interactive techniques. ACM, 2001.
[28] Mukaida, S., et al. “Facial image synthesis system: futon–evaluation as tools for cognitive research on face processing–,” Trans. IEICE 85 (2002): 1126-1137.
[29] Kraevoy, V., Sheffer, A., and Gotsman, C. “Matchmaker: constructing constrained texture maps,” ACM Transactions on Graphics (TOG) 22.3 (2003): 326-333.
[30] Tutte, W. T. “How to draw a graph,” Proc. London Math. Soc 13.3 (1963): 743-768.
[31] De Berg, M., Van Kreveld, M., Overmars, M., and Schwarzkopf, O. C. Computational geometry. Springer Berlin Heidelberg, 2000.
[32] Okamura, A. M. “Methods for haptic feedback in teleoperated robot-assisted surgery,” Industrial Robot: An International Journal 31.6 (2004): 499-508.
[33] Ryden, F., and Chizeck, H. J. “Forbidden-region virtual fixtures from streaming point clouds: remotely touching and protecting a beating heart,” Intelligent Robots and Systems (IROS), 2012 IEEE/RSJ International Conference on. IEEE, 2012.
[34] Baxter, B., Scheib, V., Lin, M. C., and Manocha, D. “DAB: interactive haptic painting with 3D virtual brushes,” Proceedings of the 28th annual conference on Computer graphics and interactive techniques. ACM, 2001.
[35] Kinashi, S., Sugisaki, Y., Kanao, H., Fujisawa, M., and Miura, K. T. “Development of a geometric modeling device with haptic rendering,” Computer-Aided Design and Applications 2.1-4 (2005): 283-290.
[36] PHANTOM Six-DOF input device by SensAble Technologies, Inc.,　
http://www.sensable.com, Accessed June (2014).
[37] Itkowitz, B., Handley, J., and Zhu, W. “The OpenHaptics™ toolkit: a library for adding 3D Touch™ navigation and haptics to graphics applications,” Eurohaptics Conference, 2005 and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, 2005. World Haptics 2005. First Joint. IEEE, 2005.
[38] Weisstein, E. W. “Fourier transform--gaussian,” From MathWorld--A Wolfram Web Resource.
http://mathworld.wolfram.com/FourierTransformGaussian.html, Accessed June (2014).
[39] Sears, F. W., Zemansky, M. W., and Young, H. D. University physics. Reading, UK: Addison-Wesley, 1982.
[40] Sederberg, T. W., and Parry, S. R. “Free-form deformation of solid geometric models,” ACM Siggraph Computer Graphics. Vol. 20. No. 4. ACM, 1986.
[41] Zeid, I. Ibrahim. CAD/CAM theory and practice. McGraw-Hill Higher Education, 1991.
[42] Wang, C. C., Zhang, Y., and Sheung, H. “From designing products to fabricating them from planar materials,” IEEE Computer Graphics and Applications 30.6 (2010): 0074-85.
[43] Schröder, P., Zorin, D., DeRose, T., Forsey, D. R., Kobbelt, L., Lounsbery, M., and Peters, J. “Subdivision for modeling and animation,” SIGGRAPH 2000 Course Notes (2000).
[44] Chew, L. P. “Constrained delaunay triangulations,” Algorithmica 4.1-4 (1989): 97-108.
[45] Wang, C. C. “WireWarping: a fast surface flattening approach with length-preserved feature curves,” Computer-Aided Design 40.3 (2008): 381-395.
[46] Kobayashi, S., and Nomizu, K. Foundations of differential geometry. Vol. 1. No. 2. New York, 1963.
[47] Besl, P. J., and McKay, N. D. “Method for registration of 3-D shapes,” Robotics-DL tentative. International Society for Optics and Photonics, 1992.