曲率半徑以及壓力角是凸輪可用性的重要參考指標，藉由曲率半徑和壓力角的分析，可以了解凸輪機構的受力情況以及傳力效率。本文利用盤形凸輪的向量方程式和曲率半徑公式，計算出凸輪輪廓之曲率半徑和壓力角，再藉由改變設計參數值以探討各個設計參數對曲率半徑最小值和壓力角的影響。在本文中討論了平移式滾子型從動件、平移式平面型從動件、擺動式滾子型從動件以及擺動式平面型從動件等四種不同的盤形凸輪機構，分別探討其各個設計參數對曲率半徑最小值和壓力角的影響，同時也針對各設計參數對曲率半徑最小值的影響程度作靈敏度分析，以了解何種設計參數對凸輪輪廓曲率半徑有較顯著的影響。最後，根據上述分析的結果指出可以同時改善曲率半徑和壓力角之設計參數條件，以提供往後在凸輪設計改良之參考。

[1]顏鴻森，1999，機構學，第二版，東華書局，台北。
[2]Waldron, K. J. and Kinezl, G. L., 1999, Kinematics, Dynamics, and Design of Machinery, John Wiley & Sons, New York.
[3]Hindhede, U., Zimmerman, J. R., Hopkins, R. B.,Erisman, R. J., Hull, W. C., and Lang, J. D., 1983, Machine Design Fundamentals: A Practical Approach, John Wiley & Sons, New York, pp. 336-339.
[4]Shigley, J. E. and Mischke, C. R., 1989, Mechanical Engineering Design, 5th Edition, MacGraw-Hill, New York, pp. 71-74.
[5]Reeve, J., 1995, Cams for Industry, Mechanical Engineering Publications Limited, London, pp. 90-126, pp. 150-164.
[6]Norton, R. L., 2002, Cam Design and Manufacturing Handbook, Industrial Press, New York, pp. 165-176, pp. 352-354.
[7]Jensen, P. W., 1987, Cam Design and Manufacture, 2nd Edition, Marcel Dekker, New York.
[8]吳曉暉，1999，平面四連桿機構運動係數之特性與應用，博士論文，國立清華大學動力機械工程學系，新竹。
[9]吳隆庸，洪嘉宏，張信良，2002，盤形凸輪輪廓的向量式表示法，技術學刊，17卷，1期，59-65頁。
[10]曾國宗，2003，盤形凸輪輪廓解析計算法之比較---包絡線法與向量表示法，碩士論文，國立清華大學動力機械工程學系，新竹。
[11]Wu, L. I., 2003, Calculating Conjugate Cam Profiles by Vector Equations, Journal of Mechanical Engineering Science, Vol. 217, No. 10, pp. 1117 - 1123.
[12]吳隆庸，張文桐，2006，平面曲線之曲率半徑，機構與機器設計，17卷，1期，13-19頁。
[13]Chen, F. Y., 1982, Mechanics and Design of Cam Mechanisms, Pergamon, New York.
[14]Wilson, C. E. and Sadler, J. P., Kinematics and Dynamics of Machinery, 2nd Edition, Harper Collins, New York, 1991.
[15]Rothbart, H. A. (Ed.), 2004, Cam Design Handbook, MacGraw-Hill, New York, pp. 170-173.
[16]Hall, A. S. Jr., 1961, Kinematics and Linkage Design, Waveland, Prospect Heights, Illinois, pp. 65-109.
[17]Hartenberg, R. S. and Denavit, J., 1964, Kinematic Synthesis of Linkages, MacGraw-Hill, New York, pp. 194-214.
[18]Sandor, G. N. and Erdman, A. G., 1984, Advanced Mechanism Design: Analysis and Synthesis (Mechanism Design, Volume 2), Prentice-Hall, New Jersey, pp. 301-365.
[19]Goetz, A., 1970, Introduction to Differential Geometry, Addison Wesley Publishing Company, Reading, Massachusetts, pp. 56-57, pp. 74-76, pp. 82-88.
[20]Larson, R. E., Hostetler, R. P. and Edwards, P. H., 1994, Calculus with Analytical Geometry, 5th Edition, D. C. Heath and Company, Lexington, Massachusetts, pp. 816-828.
[21]O’neil, P. V., 1995, Advanced Engineering Mathematics, 4th Edition, International Thomson Publishing, London, pp. 561-570.