研究生: |
張靜禾 Chang, Ching-Ho |
---|---|
論文名稱: |
每秒五千萬次取樣頻率與60dB訊雜比具雜訊整形之連續漸進式類比數位轉換器 A 50MS/s SNDR 60dB 7Bit Successive-Approximation ADC w/i Noise Shaping |
指導教授: |
朱大舜
Chu, Ta-Shun |
口試委員: |
吳仁銘
Wu, Jen-Ming 王毓駒 Wang, Yu-Jiu |
學位類別: |
碩士 Master |
系所名稱: |
電機資訊學院 - 電機工程學系 Department of Electrical Engineering |
論文出版年: | 2018 |
畢業學年度: | 106 |
語文別: | 中文 |
論文頁數: | 64 |
中文關鍵詞: | 雜訊整形 、連續漸進式類比數位轉換器 |
外文關鍵詞: | Successive-Approximation ADC, Noise Shaping |
相關次數: | 點閱:1 下載:0 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
隨著科技的進步,人類的日常生活越來越依賴科技產品,在這些便利的應用背後,類比數位轉換器是系統中不可或缺的,它能夠將大自然中的類比訊號轉換成數位訊號,使電路能夠進一步利用資訊完成目的。
現今的訊號處理皆以數位訊號處理為主,由於其高可靠度與易實現等特性,漸漸的取代了部分的類比電路,但類比訊號仍是使用者所能感受並操作的,且不同的傳輸模式須要不同的訊號傳輸型態,故做數位訊號處理時,需要對訊號做數位與類比的轉換。
數位類比轉換器會影響訊號發送路徑上的雜訊比以及訊號品質,若有多個頻率同時傳輸資料時,其數位類比轉換器之非理想效應會直接影響信號與信號間的干擾程度,亦會影響整顆元件在競爭上的優勢。且類比數位轉換的過程中,常常遇到時脈抖動與雜訊等問題,因此如何克服這些困難以產生正確的輸出訊號提供後方數位訊號處理電路進行運算便是類比數位轉換器成功於否的關鍵。
現今有許多不同類型的類比數位轉換器被提出以應付不同需求,其中連續漸進式類比數位轉換器是較為流行的,因為它能夠在製程優化的同時獲得更多的優勢。
本論文實現了一個具雜訊整形之連續漸進式類比數位轉換器,在每秒五千萬次取樣的速度下,這個7位元連續漸進式類比數位轉換器利用台積電65奈米的CMOS製程來設計,操作電壓為1.2V。
With new technological advances, people have relied on technology products more and more in daily life. The analog-to-digital converter (ADC) is indispensable in the convenient application. The ADC can convert the analog signal in real life into digital signal, which can be used in the electric circuit to reach the goal.
The signal processing is mainly based on digital signal. Due to high reliability and easy realization, digital circuits gradually replace some analog circuits. However, analog signal is more intuitive to use and different transmission modes require different types of data. Thus, signal must be converted from analog to digital or from digital to analog while applying signal processing.
The ADC has an influence on SNR and quality of the signal on data path. The non-ideal effects of ADC also affect the interference between signals which transmitted at different frequency, which degrades the advantage of the chip. Also, the clock jitter and noise are common in the process of converting. Solving these problem to provide correct signal to followed digital signal processing circuits is the key to build a good ADC.
Many types of ADC are presented to meet the requirement. The Successive-Approximation (SAR) ADC is relatively popular for the reason that it has advantage when the process improves.
This thesis provides a 7-bit SAR ADC with noise shaping of which the sampling rate is 50 million samples per second. It is implemented in a TSMC 65 nm CMOS process with 1.2V supply voltage.
[1] I. Ahmed, Pipelined ADC Design and Enhancement Techniques. Springer, 2010.
[2] Oppenheim and Willsky, Signals and Systems. 2nd Edition, Prentice Hall, 1997.
[3] J. McCreary and P. Gray, “All-MOS charge redistribution analog-to-digital conversion techniques,” IEEE J. Solid-State Circuits, vol. 10, no. 6, pp. 371–379, Dec. 1975.
[4] B. P. Ginsburg and A.P. Chandrakasan "An energy-efficient charge recyclingapproach for a SAR converter with capacitive DAC", Proc. IEEE Symp. Circuits Syst., pp.184 -187 2005.
[5] C.C. Liu, et al, ‘‘A 10-bit 50-MS/s SAR ADC with a monotonic capacitor switching procedure,’’ IEEE J. Solid-State Circuits, vol.45, no. 4, Apr. 2010, pp. 731-740.
[6] B. P. Ginsburg and A. P. Chandrakasan, “500-MS/s 5-bit ADC in 65-nm CMOS with split capacitor array DAC,” IEEE J. Solid-State Circuits, vol. 42, no. 4, pp. 739-747, Apr. 2007.
[7] Shuo-Wei Michael Chen et al, “A 6-bit 600-MS/s 5.3-mW Asynchronous ADC in 0.13 μm CMOS” IEEE J. Solid-State Circuits, vol. 41, no. 12, pp.2669-2680, DECEMBER 2006.
[8] F. Gerfers, and M. Ortmanns, Continuous-Time Sigma-Delta A/D Conversion. Springer 2006.
[9] A. M. Abo and P. R. Gray, “A 1.5-V, 10-bit, 14.3-MS/s CMOS pipeline analog-to-digital converter,” IEEE J. Solid-State Circuits, vol. 34, pp. 599–606, May 1999.
[10] D. Aksin, M. Al-Shyoukh, and F. Maloberti, "Switch Bootstrapping for Precise Sampling Beyond Supply Voltage", IEEE Journal of Solid State Circuits, pp. 1938-1943, Aug.2006.
[11] P. M. Figueiredo and J. C. Vital, "Kickback noise reduction techniques for CMOS latched comparators", IEEE Transactions on Circuits and Systems II: Express Briefs, vol.53, no.7, pp. 541-545, 2006.
[12] Yan Huang, H.Schleifer, and D.Killat, “Design and analysis of novel dynamic latched comparator with reduced kickback noise for high-speed ADCs” Circuit Theory and Design (ECCTD), Sept. 2013.
[13] J-T Wu,Data-Conversion Integrated Circuits. 2014.
[14] A. Hamoui, T. Alhajj, and M. Taherzadeh-Sani, “Behavioral modeling of opamp gain and dynamic effects for power optimization of delta-sigma modulators and pipelined ADCs,” IEEE Low Power and Design Symposium, pp. 330-336,Oct. 2006.
[15] R. Schreier, J. Silva, J. Steensgaard, and G. Temes, “Design-oriented estimation ofthermal noise in switched-capacitor circuits,” IEEETrans. Circuits Syst. I: Reg.Pap-ers, vol. 52, pp. 2358–2368, Nov. 2005.