在高精密工具機之設計上，為因應高精密機械產業及高承載的需求，通常會採用液靜壓軸承之設計，而液靜壓系統需要節流器作為壓力補償元件。在液靜壓系統中，節流器的選用會影響軸承的效能表現。在文獻中又以主動式節流器相較於固定式節流器，有更佳的剛性表現。故本文之研究，將分析薄膜式節流器用於軸頸式線性滑軌上的分析。
在過去薄膜式節流器性能的模擬上，皆使用簡化之薄膜變形公式，利用此公式模擬而得到薄膜的設計參數，惟較少有搭配軸承之性能的分析。因此本研究將針對薄膜節流器之設計參數對軸承的影響，從基本公式推導計算到使用程式，利用不同的剛性設計參數，進而得出軸承的剛性表現。
利用程式解出軸承設計的參數，並得到腔壓及節流器流阻，以及薄膜運作時之軸承的腔壓分佈。將利用得出的節流器流阻，進而設計薄膜節流器節流面的大小、設計節流間隙及節流台，且得到的油腔壓力考慮對節流器的疲勞破壞。最後得到加工完成的薄膜節流器，並進行實驗，與模擬相互比對，以驗證分析的狀況是否符合模擬。

In the design of high-precision machine tools, in order to meet the needs of high-precision machinery industry and high load bearing, usually the use of hydrostatic bearing design is required. Hydrostatic system requires a restrictor as a pressure compensation components. In the hydrostatic sys-tem, the choice of restrictor will affect the performance of the bearing. In the previous studies show the self-compensation compared to the passive restrictors, there is a higher bearing stiffness performance. Therefore, the study of this thesis will analyze the membrane-type restrictor for the linear journal guide.
In the past, there were few study in the performance of the bearing with membrane-type restrictor analysis. Therefore, this study will be based on the design parameters of the membrane-type restrictor bearing from the basic formula to calculate by Matlab, the use of different stiffness design parameters, and then get the stiffness performance of the bearing.
Using Matlab and excel to solve the recess pressure ratio, and get the pressure and the restrictor flow resistance, then solve the pressure distri-bution for operational condition. By using the result of restrictor flow re-sistance, then design the size of the throttling of the membrane-type re-strictor, the design of regulating gap, regulate surface, and the pressure of the recess to consider the fatigue damage to the restrictor. Finally, the processed membrane-type restrictor is obtained and the experiment is compared with the simulation to verify whether the analysis is in accord-ance with the simulation.

[1] R. Bassani and B. Piccigallo, Hydrostatic Lubrication, Amsterdam, AE: Elsevier, 1992.
[2] Moshin, “The Use of Controlled Restrictors ofr Compensating Hydrostatic Bearing,” 於 Third International Conference on Machime Tool Design Research, 1963.
[3] W. Brian Rowe DSc, FIMechE, Hydrostatic, Aerostatic, and Hybrid Bearing Design, Elsevier, 2012, pp. 275-314.
[4] A. M. Loeb 且 H. C. Rippel, “Determination of optimum proportions for hydrostatic bearings,” ASLE Transactions, pp. 241-247, 1958.
[5] M. S. A. Kotilainen, Design and manufacturing of modular self-compensating hydrostatic journal bearings (Doctoral dissertation, Massachusetts Institute of Technology), 2000.
[6] B. Bhushan, Introduction to Tribology, New York: John Wiley and Sons, 2002.
[7] A. Harnoy, Bearing Design in Machinery: Engineering Tribology and Lubrication, New York: Marcel Dekker, 2003.
[8] B. J. Hamrock, R. S. Steven and B. O. Jacobson, Fundamentals of Fluid Film Lubrication, New York, NY: Marcel Dekker, 2004.
[9] N. R. Kane, Surface self-compensated hydrostatic bearings (Doctoral dissertation, Massachusetts Institute of Technology), 1999.
[10] D. J. G. C, “A New Type of Controlled Restrictor (M.D.R) For Double Film Hydrostatic Bearings and Its Application to High-Precision Machine Tools,” 於 Pergamon Press, Oxford, 1966.
[11] W. B. Rowe, J. P. O'Donoghue, “Diaphragm Valves for Controlling Opposed Pad Hydrostatic Bearings,” Proceedings of the Institution of Mechanical Engineers, Conference Proceedings, 第 冊184, pp. 1-9, 1969-70.
[12] B. C. Majumdar, "The numerical solution of hydrostatic oil journal bearings with several supply ports," Wear, pp. 389-396, 1969.
[13] Cusano, “Characteristics of Externally Pressurized Journal Bearing with Membrane type Variable-flow Restrictors as compensating elements”.
[14] S. A. Morsi, “Passively and Actively Controlled Externall Pressurized Oil-Film Bearings,” Journal of Tribology, pp. 56-63, 1972.
[15] J. P. O' Donoghue & W. B. Rowe (1968). Hydrostatic journal bearing (exact procedure). Tribology, 1(4), pp. 230-236.

[16] Ghosh, M.K. and Majumdart, B.C.<Design of multirecess hydrostatic oil journal bearings. Tribology,96(1),1980.pp.226-232.
[17] Makoto Gohara, Kei Somaya, Masaaki Miyatake, Shigeka Yoshimoto, “Static characteristics of a water-lubricated hydrostatic thrust bearing,” Tribology International, pp. 111-116, 2014.
[18] 盧佳崴, “新型主動式補償液靜壓軸承設計及實驗驗證,”於清華大學動力機械工程學系學位論文, 2011.
[19] S. Timoshenko, Theory of Plates and Shells, New York: Mcgraw-Hill College, 1959.

[20] Yoshimoto, S., T. Kume and T. Shitara (1998). "Axial load capacity of water-lubricated hydrostatic conical bearings with spiral grooves for high speed spindles: Comparison be-tween rigid and complaint surface bearings." Tribology Inter-national 31(6): 331-338.

[21] Betriebssichere Gleitlager: Berechnungsverfahren für Konstruktion und Betrieb, Georg Vogelpohl, Berlin/Heidelberg Deutschland , 1967 P.53

[22] Mon-forts-WERKZEUGMASCHINEN-Produktbroschüre-2013

[23] Design parameters analysis for membrane-type restrictors of hydrostatic single-pad bearing Ta-Hua Lai, Ting-Yu Chang, Ya-Lu Yang, Shih-Chieh Lin

[24] B. Ghosh (1972). An exact analysis of a hydrostatic journal bearing with a large circumferential sill. Wear, 21(2), pp.367-375.

[25] Ting-Yu Chang, Shin-Chieh Lin (2015)Analysis on Parame-ters and Design of Membrane-type Restrictors p.20

[26] 軸頸式液靜壓線性滑軌在工具機上的應用2015 Cheng-Han Lee ,Dr. Shin-Chieh Lin

[27] 液靜壓旋轉工作平台設計與測試 2015 Min-Cheng Lin ,Dr. Shin-Chieh Lin