研究生: |
許瑞文 Hsu, Ray Wen |
---|---|
論文名稱: |
製備多孔芳香胺高分子應用於水中金屬離子移除 Preparation of Porous Functional Heterocyclic Polymerized Aromatic Amines for Removal of Aqueous Metals from Wastewater |
指導教授: |
王本誠
Wang, Pen Cheng |
口試委員: |
林滄浪
Lin, Tsang-Lang 陳燦耀 Chen, Tsan-Yao |
學位類別: |
碩士 Master |
系所名稱: |
原子科學院 - 工程與系統科學系 Department of Engineering and System Science |
論文出版年: | 2016 |
畢業學年度: | 104 |
語文別: | 中文 |
論文頁數: | 75 |
中文關鍵詞: | 芳香胺高分子 、表面積 、胺基 、亞胺基 |
外文關鍵詞: | Polymerized aromatic amines, Surface area, Amines, Imines |
相關次數: | 點閱:4 下載:0 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
隨著工業的發展與演進,水污染已成為人類社會面臨的嚴重威脅。而重金屬是水污染的主要污染物之一,因此如何處理好重金屬廢水已成為當前亟待解決的
工作。因此,開發成本低、處理效果好的吸附劑為處理重金屬廢水的一大方向。
本研究主要分為兩大部分:第一部分探討芳香胺高分子微結構的生長機制,透過控制微結構的生長改變其表面積大小,增加吸附劑的吸附量,其中主要是起始劑的添加、氧化劑的選擇及濃度的改變,來提升多孔芳香胺的表面積,起使劑的添加會誘發聚合物產生自由基,改變微結構的生長,而不同的氧化劑對於聚合速度有顯著的影響,亦會使其微結構產生變化,並搭配微波合成,探討如何藉由外力影響自由基的生成進而影響芳香胺高分子的生成,最後,透過濃度的調整及界面反應,改變其質傳的速度,進而影響其聚合的效果,探討局部濃度過高對其影響,有利其後續的應用,而第二部分將芳香胺高分子應用於吸附水中金屬離子,改善以聚苯胺為材料的吸附劑效能,因芳香胺高分子富含胺基及亞胺基,
能達到提高金屬吸附率之目標。
關鍵字:芳香胺高分子、表面積、胺基及亞胺基
Huge metals are discharged into the environment for their wide applications in semiconductor, panel, textile dyeing, printing inks, wood preservation, paints, etc. resulting in environmental pollution. Usually, metals exist in metal ions forms in aqueous environment. Therefore, the strategy based on metal ions reduction and consequently precipitation was often used for metal ions removal.
In this work, the applicability of polymerized aromatic amines for the removal of copper and palladium from various water samples has been investigated. Besides, the effect of mass transfer, concentrations of reactants and the addition of the initiator on the morphology of polymerized aromatic amines was studied. With using different aniline analogues as the monomers, we could tune the nitrogen/carbon composition. In the meantime, we can get a high capacity adsorbent for metals by increasing the amount of amines, imines and surface area.
Key words: polymerized aromatic amines、surface area、amines and imines
1 Daraei, P., Madaeni, S.S., Ghaemi, N., Salehi, E., Khadivi, M.A., Moradian, R., and Astinchap, B.: ‘Novel polyethersulfone nanocomposite membrane prepared by PANI/Fe3O4 nanoparticles with enhanced performance for Cu(II) removal from water’, Journal of Membrane Science, 2012, 415-416, pp. 250-259
2 Liu, D., and Sun, D.: ‘Modeling Adsorption of Cu(II) Using Polyaniline-Coated Sawdust in a Fixed-Bed Column’, Environmental Engineering Science, 2012, 29, (6), pp. 461-465
3 Huang, Y., Li, J., Chen, X., and Wang, X.: ‘Applications of conjugated polymer based composites in wastewater purification’, RSC Adv., 2014, 4, (107), pp. 62160-62178
4 Wang, H., Ding, J., Lee, B., Wang, X., and Lin, T.: ‘Polypyrrole-coated electrospun nanofibre membranes for recovery of Au(III) from aqueous solution’, Journal of Membrane Science, 2007, 303, (1-2), pp. 119-125
5 Krishna, M.V., Ranjit, M., Chandrasekaran, K., Venkateswarlu, G., and Karunasagar, D.: ‘On-line preconcentration and recovery of palladium from waters using polyaniline (PANI) loaded in mini-column and determination by ICP-MS; elimination of spectral interferences’, Talanta, 2009, 79, (5), pp. 1454-1463
6 DAN LI, J.H., RICHARD B. KANER: ‘Polyaniline Nanofibers: A Unique Polymer
Nanostructure for Versatile Applications’, ACCOUNTS OF CHEMICAL RESEARCH, 2009, 42, (1), pp. 135-145
7 Sapurina, I., and Stejskal, J.: ‘The mechanism of the oxidative polymerization of aniline and the formation of supramolecular polyaniline structures’, Polymer International, 2008, 57, (12), pp. 1295-1325
8 Wang, P.-C., Dan, Y., and Liu, L.-H.: ‘Effect of thermal treatment on conductometric response of hydrogen gas sensors integrated with HCl-doped polyaniline nanofibers’, Materials Chemistry and Physics, 2014, 144, (1-2), pp. 155-161
9 Sapurina, I.Y., and Shishov, M.A.: ‘Oxidative Polymerization of Aniline: Molecular Synthesis of Polyaniline and the Formation of Supramolecular Structures’, 2012
10 Zhiming Zhang, Zhixiang Wei, and Meixiang Wan: ‘Nanostructures of Polyaniline Doped with Inorganic Acids’, 2002
11 S. G. Pawar, S. L. Patil, M. A. Chougule, B. T. Raut, D. M. Jundale and V. B. Patil: ‘Polyaniline:TiO2 Nanocomposites: Synthesis and Characterization’, 2010,2 (2), pp.194-201
12 J.E. Albuquerque, L.H.C. Mattoso, D.T. Balogh, R.M. Faria, J.G. Masters,
A.G. MacDiarmid: ‘A simple method to estimate the oxidation state of polyanilines’, Synthetic Metals, 2000, 113,pp. 19–22
13 Li, X.-G., Huang, M.-R., Duan, W., and Yang, Y.-L.: ‘Novel Multifunctional Polymers from Aromatic Diamines by Oxidative Polymerizations’, Chemical Reviews, 2002, 102, (9), pp. 2925-3030
14 Riaz, U., Ahmad, S., and Ashraf, S.M.: ‘Influence of polymerization conditions on the template free synthesis of nanoparticles of poly (1-naphthylamine)’, Polym. Bull., 2008, 60, (4), pp. 487-493
15 Thinh, P.X., Kim, J.K., and Huh, D.S.: ‘Fabrication of honeycomb-patterned polyaniline composite films using chemically modified polyaniline nanoparticles’, Polymer, 2014, 55, (20), pp. 5168-5177
16 Yan, B., Yang, J., and Cao, Y.: ‘Electrochemical behaviour of polypyridazine and o-, m-, p-diazines’, Synthetic Metals, 1988, 26, (1), pp. 9-20
17 Koketsu, J., Kato, K., Ando, F., and Fujimura, Y.: ‘Electrochemical polymerization of 3-aminopyridine and some characteristics’, Synthetic Metals, 1993, 60, (1), pp. 45-49
18 Li, X.-G., Huang, M.-R., Li, F., Cai, W.-J., Jin, Z., and Yang, Y.-L.: ‘Oxidative copolymerization of 2-pyridylamine and aniline’, Journal of Polymer Science Part A: Polymer Chemistry, 2000, 38, (24), pp. 4407-4418
19 Stević, M.C., Ćirić-Marjanović, G., Marjanović, B., Ignjatović, L.M., and Manojlović, D.: ‘The Electrochemical Oxidation of 6-Aminoquinoline: Computational and Voltammetric Study’, Journal of The Electrochemical Society, 2012, 159, (11), pp. G151-G159
20 El-Ghaffar, M.A.A., Mohamed, N.A., Ghoneim, A.A., and Shaffei, K.A.: ‘Characterization and Electrical Properties of Some Hydrochloric Acid-Doped Aniline and 2-Amino-Pyridine Homopolymers and Copolymers’, Polymer-Plastics Technology and Engineering, 2006, 45, (12), pp. 1327-1338
21 Wazzan, A.A., Ismail, M.N., and Abd El Ghaffar, M.A.: ‘Evaluation of Some Polyaromatic Amines as Antirads and Antifatigue Agents in SBR Vulcanizates’, International Journal of Polymer Analysis and Characterization, 2005, 10, (1-2), pp. 57-69
22 Patil, D., Patil, P., Seo, Y.-K., and Hwang, Y.K.: ‘Poly(o-anisidine)–tin oxide nanocomposite: Synthesis, characterization and application to humidity sensing’, Sensors and Actuators B: Chemical, 2010, 148, (1), pp. 41-48
23 Wang, P.-C., Venancio, E.C., Sarno, D.M., and MacDiarmid, A.G.: ‘Simplifying the reaction system for the preparation of polyaniline nanofibers: Re-examination of template-free oxidative chemical polymerization of aniline in conventional low-pH acidic aqueous media’, Reactive and Functional Polymers, 2009, 69, (4), pp. 217-223
24 Sadek, A.Z., Wlodarski, W., Kalantar-Zadeh, K., Baker, C., and Kaner, R.B.: ‘Doped and dedoped polyaniline nanofiber based conductometric hydrogen gas sensors’, Sensors and Actuators A: Physical, 2007, 139, (1-2), pp. 53-57
25 Venancio, E.C., Wang, P.-C., and MacDiarmid, A.G.: ‘The azanes: A class of material incorporating nano/micro self-assembled hollow spheres obtained by aqueous oxidative polymerization of aniline’, Synthetic Metals, 2006, 156, (5-6), pp. 357-369
26 Shinde, V.P., and Patil, P.P.: ‘Investigation on role of monomer(s) during electrochemical polymerization of aniline and its derivatives on low carbon steel by XPS’, Electrochimica Acta, 2012, 78, pp. 483-494
27 Zujovic, Z.D., Wang, Y., Bowmaker, G.A., and Kaner, R.B.: ‘Structure of Ultralong Polyaniline Nanofibers Using Initiators’, Macromolecules, 2011, 44, (8), pp. 2735-2742
28 Li, G., Zhang, C., Li, Y., Peng, H., and Chen, K.: ‘Rapid polymerization initiated by redox initiator for the synthesis of polyaniline nanofibers’, Polymer, 2010, 51, (9), pp. 1934-1939
29 Guo, X., Fei, G.T., Su, H., and De Zhang, L.: ‘High-Performance and Reproducible Polyaniline Nanowire/Tubes for Removal of Cr(VI) in Aqueous Solution’, The Journal of Physical Chemistry C, 2011, 115, (5), pp. 1608-1613
30 Zeng, F., Qin, Z., Liang, B., Li, T., Liu, N., and Zhu, M.: ‘Polyaniline nanostructures tuning with oxidants in interfacial polymerization system’, Progress in Natural Science: Materials International, 2015, 25, (5), pp. 512-519
31 Deka, M., Nath, A.K., and Kumar, A.: ‘Effect of dedoped (insulating) polyaniline nanofibers on the ionic transport and interfacial stability of poly(vinylidene fluoride-hexafluoropropylene) based composite polymer electrolyte membranes’, Journal of Membrane Science, 2009, 327, (1-2), pp. 188-194
32 Nand, A.V., Ray, S., Easteal, A.J., Waterhouse, G.I.N., Gizdavic-Nikolaidis, M., Cooney, R.P., Travas-Sejdic, J., and Kilmartin, P.A.: ‘Factors affecting the radical scavenging activity of polyaniline’, Synthetic Metals, 2011, 161, (13-14), pp. 1232-1237
33 Yang, W., Gao, Z., Song, N., Zhang, Y., Yang, Y., and Wang, J.: ‘Synthesis of hollow polyaniline nano-capsules and their supercapacitor application’, Journal of Power Sources, 2014, 272, pp. 915-921
34 Bhaumik, M., Maity, A., Srinivasu, V.V., and Onyango, M.S.: ‘Removal of hexavalent chromium from aqueous solution using polypyrrole-polyaniline nanofibers’, Chemical Engineering Journal, 2012, 181-182, pp. 323-333
35 Kumar, P.A., Chakraborty, S., and Ray, M.: ‘Removal and recovery of chromium from wastewater using short chain polyaniline synthesized on jute fiber’, Chemical Engineering Journal, 2008, 141, (1-3), pp. 130-140
36 Kumar, P.A., and Chakraborty, S.: ‘Fixed-bed column study for hexavalent chromium removal and recovery by short-chain polyaniline synthesized on jute fiber’, Journal of hazardous materials, 2009, 162, (2-3), pp. 1086-1098
37 Wang, J., Deng, B., Chen, H., Wang, X., and Zheng, J.: ‘Removal of Aqueous Hg(II) by Polyaniline: Sorption Characteristics and Mechanisms’, Environmental Science & Technology, 2009, 43, (14), pp. 5223-5228
38 Kong, Y., Wei, J., Wang, Z., Sun, T., Yao, C., and Chen, Z.: ‘Heavy metals removal from solution by polyaniline/palygorskite composite’, Journal of Applied Polymer Science, 2011, 122, (3), pp. 2054-2059
39 Dinda, D., and Kumar Saha, S.: ‘Sulfuric acid doped poly diaminopyridine/graphene composite to remove high concentration of toxic Cr(VI)’, Journal of hazardous materials, 2015, 291, pp. 93-101
40 Shang, M., Sun, S.-Z., Dai, H.-X., and Yu, J.-Q.: ‘Cu(II)-Mediated C–H Amidation and Amination of Arenes: Exceptional Compatibility with Heterocycles’, Journal of the American Chemical Society, 2014, 136, (9), pp. 3354-3357
41 Wei, X.-L.: ‘XPS Study of Highly Sulfonated Polyaniline’, Macromolecules 1999, pp. 3114-3117
42 Ismail, R.A.W.: ‘Preparation and Characterization of PAni Films by Electrochemical Polymerization’, IJAP, 2014, 10, (2), pp. 23-26
43 Xing-Rong Zeng: ‘Structures and properties of chemically reduced polyanilines’, Polymer, 1998, 39, (5), pp. 1187-1195
44 Lindfors, T., and Ivaska, A.: ‘Raman based pH measurements with polyaniline’, Journal of Electroanalytical Chemistry, 2005, 580, (2), pp. 320-329
45 M. Deka, A.K. Nath, A. Kumar: ‘Effect of dedoped (insulating) polyaniline nanofibers on the ionic transport and interfacial stability of poly(vinylidene fluoride-hexafluoropropylene) based composite polymer electrolyte membranes’, Journal of Membrane Science, 2009, 327, pp. 188–194
46 Jose, S.P., and Mohan, S.: ‘Vibrational spectra and normal co-ordinate analysis of 2-aminopyridine and 2-amino picoline’, Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy, 2006, 64, (1), pp. 240-245
47 Lili Ding, Xingwu Wang and R.V. Gregory: ‘Thermal properties of chemically synthesized polyaniline EB powder’, Synthetic Metals, 1999, 104, pp.73-78’