近年來,由於產品製造技術的不斷進步,產品的可靠度越來越高。因此如何評估高可靠度產品的壽命資訊,為生產製造商重要的研究課題。進行產品壽命推估,當產品的壽命分配發生誤判時,將影響估計壽命的精準性。本論文以廣義加瑪分配之型I設限為壽命的真實模型,在非加速和加速壽命試驗下,分別導出將他誤判成韋伯或對數常態分配時,其壽命p-th百分位數之漸近分配。並以相對偏差和均方差為評估準則,探討如何挑選適當的試驗配置,以降低誤判之效應與達到產品可靠度之需求。
參考文獻
Farewell, V. W. and Prentice, R. L. (1977), “A study of distributional shape in life testing”, Technometrics, 19, 69-75.
Lawless, J. F. (2003). Statistical models and methods for lifetime data, 2nd ed, John Wiely, New York.
Leiblein, J. and Zelen, M. (1956), “Statistical Investigation of the Fatigure Life of Deep-Groove Ball Bearings”, Juurnal of Research of the National Bureau of Standards, 50, 273-316.
Meeker, W. Q. and Escobar, L. A. (1998), Statistical methods for reliability data, John Wiely, New York.
Meeker, W. Q. and Hahn, G. J. (1978), “A comparison of accelerated test plans to estimate the survival probabilityat a design Stress”, Technometrics, 20, 245-247.
Nelson, W. and Meeker, W. Q. (1978), “Theory for optimum acclerated censored life tests for weibull and extreme value distribution”, Technometrics, 20, 171-177.
Pascual, F. G. and Montepiedra, G. (2005), “Lognormal and Weibull Accelerated Lift Test Plans Under Distribution Misspecification”, IEEE transactions on reliability, 54, 43-52.
Prentice, R. L. (1974), “A log gamma model and its maximum likelihood estimation”, Biometrika, 61, 539-544.
White, H. (1982), “Maximum Likelihood Estimation of Misspecified Models”, Econometrica, 50, 1-26.
林宜君 (2000), “韋伯分配與對數常態分配之判別研究”, 國立清華大學統計學研究所碩士論文.
喬治華及曾勝滄 (1993), “在加速壽命試驗下探討韋伯和對數常態之分類問題”, 中國統計學報, 31, 235~251.