針對有機共軛高分子發光二極體多層的製作一直以來都受到相同溶劑的選用導致互融問題的影響，除了藉用化學合成的方法外，長期以來都沒有太重大的突破，本實驗室藉由緩衝溶液的使用成功的製作出界面良好、發光均勻且生命期較長的發光二極體，這一個技術成功的突破有機共軛高分子發光二極體無法製作多層的困難，提供了高分子發光二極體在元件結構設計上一個全新的想法和方向，依此方法，透過簡單的物理方法就可以完成繁複化學合成才能達到的結果，可以廣泛的使用在各種不同類型的高分子材料中，而且不會對其造成任何不好的影響，本論文延伸此緩衝溶液製作多層有機共軛高分子發光二極體的技術，設計出許多多層PLED發光結構，並也確切舉出很多利用緩衝層溶液的方法來加以實現，並且都得到良好的結果，其中高分子藍光發光二極體已經可以成功的做到亮度32000cd/m2，效益接近7cd/A，這也打破了高分子藍光發光二極體的世界紀錄，並用此藍光再透過微量的摻雜後，調和出CIE座標上非常接近(0.330.33)的白光，這些都可以證明本實驗室所研發出的緩衝溶液對製作高效益，高亮度共軛有機發光二極體是非常重要的。

The fabrication of multilayer polymeric devices has been plagued by serious inter mixing at the interface. There is little progress in the fabrication of polymeric multilayer devices besides chemical synthesis of materials different solubility. A solution-buffer technology was invented in our laboratory previously and multilayer PLEDs with improved, uniformity and longer lifetime was demonstrated. This solution-buffer technology provides a feasible way to fabricate multilayer polymeric devices and enables many useful designs. Extend our previously work on solution-buffer technology in the design. Fabrication of high-brightness PLEDs and designed multilayer PLEDs were obtained. Devices fabricated through the solution-buffer technology were successfully demonstrated. For blue PLED a luminance of 32000cd/m2 and a efficiency of 7cd/A was achieved breaking previously world record. With the blue PLED, white light close to (0.33,0.33) in CIE coordinate was generated with proper doping little yellow-green light and red light. All these prove that our solution-buffer technology in overcoming the fabrication of high performance PLED are very important.

【1】J. H. Burroughes, D. D. C. Bradley, A. R. Brown, R. N. Marks, K. Mackay, R. H. Friend, P. L. Burns, and A. B. Holmes, Nature 347, 539 (1990).
【2】D. Braun and A. J. Heeger, “Visible Light Emission From Semiconductor Polymer
Diodes”, Appl. Phys. Lett. 58, 1982 (1991).
【3】Brown AR,Bradley DC C,Burroughtes JH,Friend RH,Greenham NC,Burn
PL,Holmes AB and Kraft A.Appl.Phys.Lett.61,2793(1992)
【4】J. C. W. Chien, “Polyacetylene: Chemistry, Physics, and Material Science”,
Academic Press, Orlando (1984).
【5】Roberto M. Faria and O.N. Oliveira Jr.Instituto de Física de São Carlos, USP
C.P. 369, 13560-970 São Carlos, SP, Brazil Braz. J. Phys. vol.29 n.2 São Paulo June 1999
【6】G-K Ho.H-F Meng,Shi-Chang Lin APL 85(20):4576-4578 11 15 2004
【7】Xu QF,Duong HM,Wudl F,et al.
APPLIED PHYSICS LETTERS 85(16):3357-3359 OCT18 2004
【8】Tu GL,Zhou QG,Cheng YX,et al.
APPLIED PHYSICS LETTERS 85(12):2172-2174 SEP 20 2004
【9】Kenta Hosoi *, Tatsuo Mori , Teruyoshi Mizutani , Takakazu Yamamoto , Naoyuki Kitamura a, a a b b,c Thin Solid Films 438 –439 (2003) 201–205
【10】Daisuke FUJISHIMA, Tatsuo MORI, Teruyoshi MIZUTANI, Takakazu YAMAMOTO1 and Naoyuki KITAMURA2 The Japan Society of Applied Physics
【11】Karl-Heinz Weinfurtner,a) Hisayoshi Fujikawa, Shizuo Tokito, and Yasunori Taga APPLIED PHYSICS LETTERS VOLUME 76, NUMBER 18
【12】T.M.Brown and R.H.Friend "Electronic line-up in light-emitting diodes with alkali-halide/metal cathode"J.Appl.Phys,Vol.93,No.10, 15 May 2003
【13】M. Stoßel a,), J. Staudigel a, F. Steuber a, J. Blassing a, J. Simmerer a, A. Winnacker b, ¨ ¨H. Neuner c, D. Metzdorf c, H.-H. Johannes c, W. Kowalsky c “Electron injection and transport in 8-hydroxyquinoline aluminum” Synthetic Metals 111-112(2000)19-24
【14】 Hongbin Wu,Fei Huang,Junbiao Peng and Yong Cao* "Efficient electron injection from bilayer with aluminum as cathode" Synthetic Metals 153(2005)197-200
【15】A.B.Holmes,D.D.Bradley,A.R.Brown,P.L.Burn,J.H.Burroghes,R.H.Friend
,N.C.Greenhan,R.W.Gymer,D.A.Halliday,R.W.Jackson,A.Kraft,
J.H.F.Martens,K.Pichler,I.D.W.Samuel,Synth.Met.,55-57,4031,(1993)
【16】R. W. Smith and A. Rose, “Space-Charge-Limited Currents in Single
Crystals of Cadmium Sulfide”, Phys. Rev 97,1531 (1955)
【17】S.Karg,M.Meier,andW.Riess,J.App.Phys.82,1951.(1997)
【18】S.Karg, M.Meier, and W.Riess, “Light-Emitting Diodes Based on PPV :I.
Charge Carriers Injection and Transport”, J. App. Phys. 82, 1951 (1997).
【19】I. D. Parker, A. J. Heeger, “Carrier tunneling and device characteristics in
polymer light-emitting diodes”, J. Appl. Phys., 75 (1994) 1656.
【20】R. H. Fowler and L. Nordheim, Proc. R. Soc. London Ser. AA, 119, 173
(1928)
【21】J.C.Scott,J.H.Kaufman,P.J.Brock,R.Dipietro,J.Salem,andJ.A.GoitiaJ.Appl.
Phys.,79,2745(1996)
【22】Schlatmann AR,Floet DW,Hilberer A,Garten F,Smulders PJM,Klapwijk
TM,Hadziioannou G.Appl.Phys.69,1764(1996)
【23】Ji-Seon Kima_ and Richard H. Friend, Ilaria Grizzi and Jeremy H.
Burroughes, APPLIED PHYSICS LETTERS 87, 023506 (2005)
【24】Stelios A. Choulis,a_ Vi-En Choong, Mathew K. Mathai, and Franky So
APPLIED PHYSICS LETTERS 87, 113503 (2005)

【25】J. S. Kim, R. H. Friend, and F. Caciallia) APPLIED PHYSICS LETTERS VOLUME 74, NUMBER 21
【26】X. M. Ding L. M. Hung, L. F. Cheng, Z. B. Deng, X. Y. Hou, C. S. Lee,a) and S. T. LeeAPPLIED PHYSICS LETTERS VOLUME 76, NUMBER 19
【27】Beeling Low, Furong Zhu,a) Keran Zhang, and Soojin Chua APPLIED PHYSICS LETTERS VOLUME 80, NUMBER 24
【28】Shin-Rong Tseng, Shi-Chang Lin, and Hsin-Fei Meng, Hua-Hsien Liao, Chi-Hung Yeh, Huan-Chung Lai, and Sheng-Fu Horng, Chain-Shu Hsu”General method to solution –process multilayer polymer light-emitting diode, APPLIED PHYSICS LETTERS 88,163501 (2006)