簡易檢索 / 詳目顯示

研究生: 徐桂香
Kuei-Hsiang Hsu
論文名稱: 光碟機讀取頭光路之數學模型
The Mathematical Model of Optical Path for Pickup of Optical Drive
指導教授: 陳文良
Wen-Liang Chen
口試委員:
學位類別: 碩士
Master
系所名稱: 工學院 - 動力機械工程學系
Department of Power Mechanical Engineering
論文出版年: 2001
畢業學年度: 89
語文別: 中文
中文關鍵詞: 光碟機讀取頭光路數學模型
外文關鍵詞: optical drive, pickup, optical path, mathematical model
相關次數: 點閱:1下載:0
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報
  • 目前光碟機的研發大致上是朝高密度、高倍速的趨勢發展,而在這樣的發展趨勢下,讀出訊號(RF、FE、TE)失真的情況也相對的較為嚴重,容易造成讀回資料(0、1)的判斷錯誤和伺服系統控制上的困難。如果能了解光碟機讀取頭的光路運作模型,則能增加對讀出訊號的了解,也有助於日後對光碟機系統的改善。本論文針對Hitachi之HOP-1000讀取頭,利用波動光學的基本理論去建立對應之光路數學模型,強調的是對光碟機讀取頭系統的完整架構,不單針對空間中(spatial-domain)的光強度分布作討論,且對時態上(time-domain)的訊號作分析,並且由HOP-1000的量測數據與模擬結果相符,驗證了本論文架構的準確度。


    第一章 緒論 1 1-1 研究動機 1 1-2 論文架構 3 第二章 光學原理簡介 4 2-1 光學簡介 4 2-2 光的干涉與繞射 12 2-2-1 光的干涉 15 2-2-2 光的繞射 18 2-3 傅立葉光學 25 第三章 光碟機讀取頭的光路數學模型 33 3-1 光碟片規格比較 33 3-2 光感測器簡介 39 3-3 讀取頭的光路數學模型 41 第四章 模擬結果與討論 53 4-1 單位討論 53 4-2 CD-ROM的模擬架構 56 4-3 像散法的模擬結果和討論 62 4-3-1 Case A的模擬結果和討論 67 4-3-2 Case B的模擬結果和討論 75 4-4 模擬參數設計和驗證方法 81 4-4-1 模擬參數設計 81 4-4-2 驗證方法 82 4-5 光路之模擬結果和討論 85 4-5-1讀取頭各元件對應的光強度分布 85 4-5-2 RF、FE訊號的模擬結果和討論 87 第五章 總結 92

    [1] 王東釧, 王威翔, “光碟之規格與結構”, 工業材料150期, pp.139-149, 88年6月.
    [2] Tom D, Milster, “A user-friendly diffraction modeling program”, Optical Data Storage Topical Meeting, pp.60-61, 1997.
    [3] C.D. Wright, M.K. Loze, P.W. Nutter, “A matlab-based read/write model for magneto-optic recording”, ODS. Conference Digest, pp.66-67, 1997.
    [4] C.D. Wright, P.W. Nutter, M.K. Loze, S.D. Jepson, “Computer simulation tools for the design and optimization of optical disk systems”, IEEE International Conference on Consumer Electronics, pp.166-167, 2000.
    [5] B.E.A.Saleh, M.C.Teich, Fundamentals of Photonics, New York :Wiley, 1991.
    [6] Miles V.Klein, Thomas E.Furtak, Optics, New York :Wiley, 1986.
    [7] S.Miyanabe, H.Kuribayashi, Y.Tomita, K.Yamamoto, F.Yokogawa, “Tolerance of 3 beam cross-talk canneller”, Optical Data Storage, 2000. Conference Digest ,pp.197-199, 2000.
    [8] S.Bellini, P.Migliorati, G.Paltenghi, “Nonlinear cross talk cancellation for high density optical recording”, Global Telecommunications Conference, 1999. GLOBECOM '99 , Vol.1b, pp.933-938, 1999.
    [9] H.H. Hopkins, “Diffraction theory of laser read-out systems for optical video discs”, J. Opt. Soc. Am., Vol.69, No.1, pp.4-24,1979.
    [10] P.W. Nutter, Image Formation In The Scanning Optical Microscope, Thesis submitted to the University of Manchester for the degree of Doctor of Philosophy in the Faculty of Science and Engineering, 1997.
    [11] G.Bouwhuis, J.Braat, A.Huijser, J.Pasman, G.van Rosmalen, K.Schouhamer Immink, Principles of Optical Disc Systems, Philips Research Laboratories, Eindhoven, 1985.
    [12] Winslow Mimnagh, “Rewritable compact disks fill multiple storage needs”, Laser Focus World, pp.203-208, August 1998.
    [13] Isao Satoh, Shunji Ohara, Nobuo Akahira, Mutsuo Takenaga, “Key technology for high density rewritable DVD(DVD-RAM)”,IEEE Transactions On Magnetics, Vol.34, No.2, pp.337-342, March 1998.
    [14] CD-Audio Red Book
    [15] Jordan Isailovic, “Videodisc and optical memory systems”, New Jersey: Prentice-Hall, Inc., Englewood Cliffs, 1985.
    [16] A. B. Marchant, “Optical Recording: A Technical Overview”, California: Addison-Wesley, 1990.
    [17] DVD Specifications for Read-Only Disk: Part 1 Physical Specifications, version 1.0, August 1996.
    [18] Optical Pick-Up Specifications for DVD/CD: HOP-1000, Hitachi. Ltd., October 1998.
    [19] “CD-ROM system”, Sony Corp.

    無法下載圖示 全文公開日期 本全文未授權公開 (校內網路)
    全文公開日期 本全文未授權公開 (校外網路)
    全文公開日期 本全文未授權公開 (國家圖書館:臺灣博碩士論文系統)
    QR CODE