研究生: |
劉斐禎 |
---|---|
論文名稱: |
冪過程在預防保養策略上的應用 |
指導教授: | 張延彰 |
口試委員: | |
學位類別: |
碩士 Master |
系所名稱: |
南大校區系所調整院務中心 - 應用數學系所 應用數學系所(English) |
論文出版年: | 2011 |
畢業學年度: | 100 |
語文別: | 中文 |
中文關鍵詞: | 維修保養 、冪過程 、成本模型 |
外文關鍵詞: | preventive maintenance, power process, cost model |
相關次數: | 點閱:1 下載:0 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
本文中,我們將採用Yeh Lam(2007)冪過程(power process)模型及成本模型來探討維修保養的問題。在單一構面的情形下,我們利用與Yeh Lam(2007)不同角度來推論最佳策略的存在性。在此角度下,可簡單低推論到雙構面的情形。
In this paper, we will introduce a power process model by Yeh Lam(2007) and a cost model to discuss the preventive maintenance problem. In the one-dimensional policy, we use different perspective from Yeh Lam(2007) to infer the existence of the best policy. In this perspective, we can simply inference to two-dimensional policy.
參考文獻
[1] 張毓馨(2007),“針對廣義指數分配的租約設備其檢修策略之探討”,國立新竹教育大學。
[2] 顏嘉(2005),“考量預防性維修下雙構面保固模式之研究”,國立成功大學。
[3] 解文榮(2005),“固定失效率降低法下租賃設備之週期性預防保養策略-
以韋伯為例”,國立台灣科技大學。
[4] Boland, Philip J.& Proschan, Frank(1982), “Periodic replacement with increasing minimal repair costs at failure”, Operations Research, 30(6), pp.1183-1189.
[5] Iskandar, B.P. and Murthy, D.N.P., (2003), “Repair-Replace Strategies for Two-Dimensional Warranty Policies”, Mathematical and Computer Modelling, vol.38, pp.1233-1241.
[6] Kim, H.G. and Rao, B.M.,(2000), “Expected warranty cost of two-attribute free-replacement warranties based on a bivariate exponential distribution”, Computers & Industrial Engineering, vol.38, pp.425-434.
[7] Percy, D.F.and Kobbacy, A.H.,(2000),“Determining economical maintenance intervals”,International Journal of Production Economics,vol.67,pp.87-94.
[8] Seo, J.H. and Bai, D.S., (2004), “An optimal maintenance policy for a system
under periodic overhaul”, Mathematical and Computer Modelling, vol.39, pp.373-380.
[9] Sheu, S.-H.(1991), Periodic replacement with minimal repair at failure and general random repair cost for a multi-unit system Microelectronics Reliability, 31(5), pp.1019-1025.
[10] Yeh Lam,(2007), “A geometric process maintenance model with preventive repair”.European Journal of Operational Research 182,pp.806-819.