本論文支援一個同步設計審閱平台(Concurrent Design Review Platform, CDRP)，此平台可經由整合性優質設計(Design For eXcellence, DFX)架構支援新產品導入(New Product Introduction, NPI)生命週期及跨功能部門進行同步審閱。其中，本研究以三家代表性筆記型電腦公司的新產品導入參考流程為例，經由標竿管理手法進行比較，得到一個改良性的新產品導入流程參考模型。利用此新產品導入流程參考模型與跨功能部門或跨審閱角度的關聯性，可以得到同步設計審閱平台的審閱矩陣。此矩陣提供跨功能部門或跨審閱角度之同步屬性呈現及審閱的功能，藉由同時匯入各資料/知識庫中製造、行銷及服務、採購及研發與設計等部門的限制及思考角度，使設計部門能將所有設計出來的相關屬性有系統、清楚的呈現於同步設計屬性審閱平台上，以有利於各相關部門或審閱角度去審閱各自相關的DFX屬性，不同的部門可能看到不一樣的屬性組合。
本研究之貢獻包括：
(1)提供一個改良式的新產品導入流程參考模型，其目的在改良現有新產品導入流程中因同步多面向的優質設計審閱(simultaneous multiple DFX reviews)之無效率而衍生的研發問題。
(2)建立一個以生命週期及流程為基礎的審閱平台，此平台在網路環境中運作並支援跨功能部門及跨審閱角度在跨地域環境下作業。

This study established an integrated Concurrent Design Review Platform (CDRP) which supports life cycle production introduction and simultaneous cross-functional reviews through an integrated Design For eXcellence (DFX) framework using notebook computer industry as an example. New product introduction (NPI) processes used by three major notebook computer manufacturers were benchmarked and an improved reference model for NPI was proposed. The proposed NPI process reference model and the concerned functions/viewpoints were used as the longitude and latitude to form the review matrix for CDRP. The review relationships among the various functions throughout the NPI stages were established. The platform provides simultaneous reviews by multiple functional departments and viewpoints, such as sales/marketing, manufacturing, R&D, procurement, cost, quality and so on throughout the stages in the life cycle of production introduction, usage, and logistics supports.
The contributions of this study include:
(1)Proposing an improved NPI process reference model which corrected exist problems in New Product Introduction processes due to inefficiency in simultaneous multiple DFX reviews.
(2)Establishing a life cycle process-based review platform which works under the internet environment and supports concurrent cross-functional, cross-viewpoint reviews over various locations.

參考文獻
1.先鋒可靠度研究小組譯，「FMEA & FTA實施法：故障模式，故障樹解析之評價 (鈴木順二郎、牧野鐵治、石板茂樹) 」，台灣台北，先鋒企業管理發展中心，1988年
2.先鋒品質機能展開研究小組譯，「品質質機能展開法：如何有效掌握顧客需求 (水野滋、赤尾洋二)」，台灣台北，先鋒企業管理發展中心，1995年。
3.先鋒品質機能展開研究小組譯，「品質展開入門 (赤尾洋二) 」，台灣台北，先鋒企業管理發展中心，1995年。
4.林春梅，「產業調查及技術季刊」，交通銀行電子季刊，第142期， http://www.ctnbank.com.tw/，2002年。
5.陳俊伊，「同步工程應用於新產品開發專案工作協調之研究」，國立台北科技大學生產系統工程與管理研究所(未出版)碩士論文，2002年。
6.許棟樑、王富年、陳大仁，「整合性優質設計績效評估系統」，中國工業工程學會九十四年度年會暨學術研討會，臺灣•新竹•中華大學，2005年。
7.許盛堡，「建構一個QFD與FMEA之整合架構」，元智大學工業工程與管理研究所(未出版)碩士論文，2003年。
8.許棟樑、洪碧溎 ，「筆記型電腦產業新產品導入績效衡量機制與標竿」，國立清華大學工業工程及工程管理學系(未出版)碩士論文, 2002。
9.許棟樑、陳大仁 ，「筆記型電腦公司DFX屬性平台(Design For excellence -DFX Attribute Platform for an NB Company)」, 清華大學工業工程及工程管理學系(未出版)業界研究報告，2003年。
10.許棟樑、陳大仁 ，「整合性優質設計架構」，科技管理學刊，第9卷第4期，頁149-177，2004年。
11.許棟樑、陳大仁，「筆記型電腦產業新產品導入流程標竿及設計」，科技管理學刊，第11卷第1期，頁31-62，2006年。
12.許棟樑、陳大仁「筆記型電腦廠新產品開發流程標竿架構之建立」，企業研發與設計標竿典範管理技術研討會，工研院機械工業研究所，2004年。
13.許棟樑，湯群輝，「以失效為基礎的設計回饋及績效評量系統」，國立清華大學工業工程研究所(未出版)碩士論文，2004年。
14.許棟樑，謝仁豪，「電子組裝製造屬性展開-取置製程」，國立清華大學工業工程研究所(未出版)碩士論文，2004年。
15.楊錦洲、孫學民，「供應鏈流程之六標準差交期績效模式之建構-以筆記型電腦業為例」，中原大學工業工程研究所(未出版碩士)論文，2003年。
16.湯玲郎、蔡明昌、許棟樑，「台灣三大都會區之筆記型電腦消費者行為研究」，2004中國工業工程學會年會暨學術研討會，台南，2004年9月。
17.劉志明、呂志平，「整合QFD與DFA之同步設計與評估方法之構建」，國立清華大學工業工程及工程管理學系(未出版)碩士論文，1998年。
18.劉志明、蔡健民，「新產品開發之供應商評估系統之建立」，清華大學工業工程研究所(未出版)碩士論文，2004年。
19.饒忻、王建翔，「台灣筆記型電腦製造商研發績效評比」A中原學報，第29卷第4期，頁399-411，2001年。
20.蕭元中，「產業調查及技術季刊－筆記型電腦產業」，交通銀行電子季刊，第148期， http://www.ctnbank.com.tw/，2004年。
21.Alting, L., “Life cycle design”, Concurrent Engineering, 1(6), pp.19-27, 1991.
22.Alting, F., L. A. Armillotta, W. K. Eversheim, G. Seliger and N. Roth, “A Key Issue in Product Life Cycle: Disassembly”, Annals of CIRP, pp.1-13, 1993.
23.Baxter, J. E., N. P. Juster and A. de Pennington, “ A Functional Data Model for Assemblies Used to Verify Product Design Specifications”, Proceedings of the IMechE, Part B, Vol. 208, No. B4, pp.235-244, 1994.
24.Bendell, A., “Introduction to Taguchi Methodology, Taguchi Methods”, In: Proceedings for 1988 European Conference,” Lndon: Elsevier Applied Science, pp. 1-14, 1988.
25.Boothroyd, G., C. Poli and L. March, “Handbook of feeding and operating and orienting techniques for small part.”, Technique Report, Department of Mechanical Engineering, University of Massachusetts, 1978.
26.Boothroyd, G. and P. Dewhurst, “Design for assembly-a designers handbook”, Technique Report, Department of Mechanical Engineering, University of Massachusetts, 1983.
27.Boothroyd, G. and P. Dewhurst, “Product design for assembly”, Wakefield, RI: Boothroyd Dewhurst, 1986.
28.Boothroyd, G. and P. Radovanovic, “Estimating the cost of machined components during the conceptual design of a product”, Annals of CIRP, 38(1), p.157, 1989.
29.Boothroyd, G. and L. Alting, ” Design for Assembly and Disassembly”, Keynote Paper, Annals of the CIRP, 41 (2), pp.625-636, 1992.
30.Boothroyd, G. and P. Dewhurst, and W. Knight,“Product design for manufacturing and assembly”, New York: Marcel Dekker, Inc, 1994.
31.Corbett, J., “How Design Can Boost Profit”, Eureka Transfers Technology, May, pp.59-65, 1987.
32.Corbett, J., M. John, M. Dooner and P. Christopher, “Design For Manufacture”, Addison-Wesiey, 1991.
33.Crow, K. A., “Tool and Manufacturing Engineers Handbook: Design for Manufacturability”, Concurrent engineering In R. Bakerjian, pp.2-1-2-19, Vol. 6, 1983.
34.Fiksel, J. and K. Wapman,“How to design for environment and minimize the life cycle cost”, In: IEEE symposium on Electronics and the Environment, San Francisco, CA, May, 1991.
35.General Electric Co., “Manufacturing Producibility Handbook (MPH)”, Manufacturing Services Schenectady, NY, 1960.
36.Hauser, J. R. and D. Clausing, “The house of quality”, Harvard Business Review, 66(3), pp.63-73, 1988.
37.He, David, Andrew Kusiak＊and Tzu-Liang Tseng(Bill) , “Delayed product differentiation : a design and manufacturing-A design and manufacturing perspective”, Computer-Aided Design, Vol. 30, No. 2, pp. 105-113, 1998.
38.Henstock, M. E., “Design for Recyclability”, Conservation and Recycling, Vol. 4, Issue 3, September 1990, pp.253-254, 1988.
39.Horvath, A., C. T. Hendrickson, L. B. Lave and F. C. Michael, “Performance measurement for environmentally- conscious manufacturing”, Manufacturing Science and Engineering, MED2-2/MH3-2, pp. 241-260, 1995.
40.Huang, G. Q., S. W. Lee and K. L. Mak, “Web-based product and process data modeling in concurrent design for X”, Robotics & Computer-integrated Manufacturing, pp.53-63, 1999.
41.Huang, G. Q. and K. L. Mak, “The DFX shell：A generic framework for developing design for X tools”, Robotics & Computer-integrated manufacturing, pp.271-280, 1997.
42.Ishii, K., B. H. Lee and C. F. Eubanks, “Design for product retirement and modularity based on technology life-cycle”, Manufacturing Science and Engineering, MED 2-2/MH 3-2, pp.921-933, 1995.
43.Kalpakjian,” Manufacturing Engineering and Technology”, 4th, Prentice Hall 1996.
44.Kim, J. S. et al., “Development of concurrent engineering system for design of composite structures”, Composite Structures, Vol. 50, pp.297-309, 2000.
45.Kuo, Tsai-C., Samuel H. Huang and Hong-C. Zhang, “Design for manufacture and design for ‘X’: concepts, applications, and perspectives”, Computers & Industrial Engineering, 41, pp.241-260, 2001.
46.Leonard, L., “Design for Environment”, Plastics Design Forum, May/June, pp.25-32, 1991.
47.O’Driscoll, Martin,“Design for Manufacture”, Journal of Materials Processing Technology, pp.318-321, 2002.
48.Otto Kevin and Kristin Wood, “Product Design：Techniques in Reverse Engineering and New Product Development”, Prentice Hall, 2001.
49.Pahl, G. and W. Beitz, “Engineering Design：A Systematic Approach”, 2nd, Springer, 1996.
50.Phadke, S. M., “Quality Engineering using robust design”, Englewood cliffs, NJ: Prentice-Hall, 1989.
51.Prasad, B., “Concurrent Engineering Fundamentals-Integrated Product and Process Organization”, Prentice Hall, New Jersey 1996.
52.Poolton, J. and I. Barclay, “New Product development from past research to future applications”, Industrial Marking Management, Vol. 27. pp. 197-212, 1998.
53.Riedl, J. C. K. H. and K. S. Pawer, “The Strategic Choice of Simultaneous Versus Sequential Engineering for the Introduction of New Product”, Int. J. Technology Management, pp. 321-334, 1991.
54.Sheu, D. Daniel, J. Lin and Peter Liao (2000), “Benchmarking Manufacturing Management for Taiwan’s I.C. Packaging Plants”, A Special Issue of the International Journal of Industrial Engineering - Theory, Applications and Practices 2000, Vol. 7 (4), pp.365-370.
55.Sheu, D. Daniel, and Shiao-Lang Peng,”Assessing Manufacturing Management Performance for Notebook Computer Plants in Taiwan”, International Journal of Production Economic, Vol.84, pp.215-228, 2003.
56.Sheu, D. Daniel, and Tone-Cheng Wang, “Manufacturing Process Analysis for Circuit Board Assembly Lines in Notebook Computer Plants”, International Journal of Industrial Engineering - Theory, Applications and Practices, 2001.
57.Sheu, D. Daniel and D. R. Chen, “Backward Design and Cross-Functional Design Management System”, Proceedings of the 35th International Conference on Computers and Industrial Engineering, Istanbul, Turkey, June 19-22, 2005.
58.Sheu, D. Daniel, Fu-Nian Wang and D. R. Chen, “Integrated Performance Measurement System for Design For eXcellence”, Proceeding of Intelligient Manufacturing & Logistics Systems, Waseda University, Japen, 2005.
59.Sheu, D. Daniel and P. K. Hung, “New Product Introduction Performance Measurement & Evaluating System for Notebook Computer Industry”, Proceeding of Intelligient Manufacturing & Logistics Systems, Waseda University, Japen, 2005.
60.Shi, J., G. Q.Huang and K. L. Mak, “Synchronised Design for X platform for performance measurement on the WWW”, International Journal Technology Management, Vol. 26, No. 1, pp.28-44, 2003.
61.Spendolini, M. J., “The Benchmarking Book ”, AMACOM, 1992.
62.Stoll, H. W., “Design for Manufacturing”, Manufacturing Engineering, January, pp.67-73, 1988.
63.Szykman, Simon, Sriram Ram D. and Regli William C., “The Role of Knowledge in Next-Generation Product Development Systems”, ASME Journal of Computation and Information Science in Engineering, Vol. 1, No. 1, 2001.
64.Taguchi, G., “Taguchi method-cutting the cost of quality, Quality testing”, February, 1993.
65.Ullman, David G. “The Mechanical Design Process”, 2nd, Mcgraw-Hill, 1997.
66.Warnecke, H. J. and R. Bassler, “Design for Assembly-part of the design process”, Annals of CIRP, 37(1), 1, 1988.
67.Waterbury, R., “Designing Parts for Automated Assemble”, Assembly Engineering, February, pp.24-28, 1985.
68.Zairi, Mohamed and Paul Leonard, “Practical Benchmarking : The Complete Guide”, Chapman & Hall, 1994.