微型直接甲醇燃料電池微製程製造與系統整合

簡易檢索 / 詳目顯示

回結果列表

研究生：	賴昱嘉 Yu-Chia Lai
論文名稱：	微型直接甲醇燃料電池微製程製造與系統整合 Design, Microfabrication, and Integration of μDMFC System
指導教授：	饒達仁 Da-Jeng Yao
口試委員:
學位類別：	碩士 Master
系所名稱：	工學院 - 動力機械工程學系 Department of Power Mechanical Engineering
論文出版年：	2006
畢業學年度：	94
語文別：	中文
論文頁數：	122
中文關鍵詞：	微型甲醇燃料電池、微機電
相關次數：	點閱：4 下載：0
分享至:	分享至facebook 分享至twitter

查詢本校圖書館目錄查詢臺灣博碩士論文知識加值系統勘誤回報

本計畫所要進行的研究，主要利用微機電技術(MEMS)，進行直接甲醇燃料電池(DMFC)的微型化，由於我們最終的目的，是希望能夠將微型直接甲醇燃料電池應用在可攜式電子產品上。所以我們希望能夠發展出一個簡單、便宜的製程。而且在加上一個好的組裝方式，因為唯有這樣，才能讓我們所製作出來的微型直接甲醇燃料電池，在不因為事後組裝方式而降低性能的狀況下，進而來提升電池的性能。
在我們製作出µDMFC之後，我們則是在改變不同的陽極濃度、陰極流速、工作環境溫度以及流道面積與MEA總面積比的參數下進行量測。接著，也利用流道上金屬層的不一樣，來探討金屬層鉑(Pt)是否可以增加整體的觸媒表面積，因而增加µDMFC的性能。

The research is to fabricate the micro direct methanol fuel cell (μDMFC) by using MEMS technology. The goal is to apply the μDMFC in the portable electronic devices. Thus, to develop a simple and cheap fabrication for a micro direct methanol fuel cell is necessary. Furthermore, a good package is also an important part in order to obtain the good performance of μDMFC.
Then we mearsured the performance of μDMFC under different conditions: the different concentration of methanol solution, different velocity of air, different operating environment temperature, and the ratio of area between channel and area of MEA. In addition, we use different metal to investigate whether th Pt can increase the area of catalyst to improve the power density or not.

總目錄
摘要    i
Abstract    ii
誌謝    iii
總目錄    iv
圖目錄    .................................................................vii
表目錄    ..................................................................xv
第一章 緒論    1
1.1 前言    1
1.2 燃料電池的發展    3
1.3 燃料電池的種類    7
    1.4 燃料電池工作原理    13
       1.4.1 極化現象............................................................................14
    1.5 文獻回顧    18
    1.6 研究動機    23
第二章 微型直接甲醇燃料電池設計製作與實驗    25
2.1 直接甲醇燃料電池之結構    .......................................................25
2.2 直接甲醇燃料電池工作原理    ...................................................25
2.3 大型直接甲醇燃料電池    ...........................................................28
       2.3.1 大型直接甲醇燃料電池設計............................................28
       2.3.2 大型直接甲醇燃料電池製作............................................28
      2.3.3 大型直接甲醇燃料電池組裝的方式................................29
    2.4 第一代直接甲醇燃料電池堆    32
       2.4.1 第一代直接甲醇燃料電池堆設計....................................32
       2.4.2 第一代直接甲醇燃料電池製作........................................40
         2.4.2.1 MEA的製作.................................................................40
         2.4.2.1 陽極、陰極的製作........................................................40
       2.4.3 第一代直接甲醇燃料電池堆組合的方式........................46
    2.5 第二代直接甲醇燃料電池堆    47
       2.5.1 第二代直接甲醇燃料電池堆設計....................................47
       2.5.2 第二代直接甲醇燃料電池製作........................................53
         2.5.2.1 MEA的製作.................................................................53
         2.5.2.1 陽極、陰極的製作........................................................54
       2.5.3 第二代直接甲醇燃料電池堆組合的方式........................58
第三章 實驗初步結果與討論    61
3.1 大型直接甲醇燃料電池    61
3.2 第一代直接甲醇燃料電池堆    63
3.3 第二代直接甲醇燃料電池堆    65
      3.3.1 流道面積與MEA總面積比例對於µDMFC的影響.......69
      3.3.2 甲醇水溶液濃度對於µDMFC的影響..............................71
      3.3.3 陰極空氣進氣方式對於µDMFC的影響..........................82
      3.3.4 工作環境溫度對於µDMFC的影響..................................93
      3.3.5 組裝方式對於µDMFC的影響........................................104
      3.3.6 夾MEA下，金屬表面為Au與Pt的差...........................104
      3.3.7 夾MEA下，將電極泡在nafion solution裡.....................107
      3.3.8夾nafion 117質子交換膜下，金屬表面為Au與Pt的差別
           ..........................................................................................108
      3.3.9 夾nafion 117質子交換膜下，金屬表面Pt，加上電場.....111
第四章 結論及未來展望    116
    4.1 結論.........................................................................................116
    4.2 未來展望.................................................................................118
參考文獻    ..................................................................................120

                                

參考文獻
[1] S. R. N. a. T. I. Valdez, Handbook of Fuel Cells-Fundamentals, Technology and Application, vol. 4: Wiley, Hoboken, NJ, 2003.
[2] C. K. Dyer, Power Source, vol. 106, pp. 31, 2002.
[3] C. Bailey, presented at Proceedings of the Conference on Advances in R&D for the Commercialization of Small Fuel Cells and Battery Technology for use in Portable Application, MD, 1999.
[4] J. H. Jeanne Pavio, Joe Bostaph, Allison Fisher, Billy Mylan and C.G. Xie, "Developing micro-fuel cells for wireless communications." Arizona, 2002.
[5] 張貴松、田中秀治、黃炳照, "日本小型/微型燃料電池的開發現況及展望." 日本、台北: 日本國立東北大學大學院機械電子工學專攻、國立台灣科技大學化工系, 2002.
[6] R. K. Jeanne Pavio, Jerry Hallmark, "Microfuel Cells for Portable Electronics," presented at Main Conference Small Fuel Cells For Portable Power Applications, Washington, DC USA, 2002.
[7] 許寧逸、顏溪成, "由碳能朝向氫能的燃料電池," in 科學發展. 台灣, 2003, pp. 6.
[8] D. Foley, " NEC Unveils Notebook PC with Built-in Fuel Cell," N. P. C. i. Japan, Ed. Japan, 2003.
[9] H. S. H. Dohle, T. Bewer, J. Mergel, D. Stolten, "Development of a compact 500 W class direct methanol fuel cell stack," Journal of Power Sources, vol. 106, pp. 313-322, 2002.
[10] R. Hockaday, "Micro-Fuel Cells at the Crossroads," presented at Main Conference Small Fuel Cells For Portable Power Applications, Washington, DC USA, 2002.
[11] A. Cisar, "Monopolar DMFC Fuel Cells for Portable Applications," presented at Main Conference Small Fuel Cells For Portable Power Applications 2002, Washington, DC USA, 2002.
[12] E.-S. P. Jaesung Han, "Direct methanol fuel-cell combined with a small back-up battery," Journal of Power Sources, vol. 112, pp. 477-483, 2002.
[13] A. K. Zhigang Qi, "Open circuit voltage and methanol crossover in DMFCs," Journal of Power Sources, vol. 110, pp. 177-185, 2002.
[14] S. J. S. S. Y. Ahn, "Performance and lifetime analysis of the KW-class PEMFC stack," Journal of Power Sources, vol. 106, pp. 295-303, 2002.
[15] T. D. A. Blum, M. Philosoph, N. Rudoy, E. Peled, "Water-neutral micro direct-methanol fuel cell (DMFC) for portable applications," Journal of Power Sources, vol. 117, pp. 22-25, 2003.
[16] P. C. J. Yu, Z. Ma, B. Yi, Electrochimica Acta, vol. 48, pp. 1537-1541, 2003.
[17] 鍾振忠, "直接甲醇燃料電池堆設計與性能分析," in 機械工程學系，元智大學. 中壢市: 台灣, 2004, pp. 133.
[18] Y.-H. C. Y. H. SEO, "MEMS-BASED DIRECT METHANOL FUEL CELLS AND THEIR STACKS USING A COMMON ELECTROLYTE SANDWICHED BY REINFORCED MICROCOLUMN ELECTRODES," IEEE, pp. 65-68, 2004.
[19] Y. H. S. a. Y. H. Cho, "A miniature direct methanol fuel cell using platinum sputtered microcolumn electrodes with limited amount of fuel," IEEE, pp. 375-378, 2003.
[20] Y. H. S. a. Y. H. Cho, "Mems-based direct methanol fuel cells and their stacks using a common electrolyte sandwiched by reinforced microcolumn electrodes," IEEE, pp. 65-68, 2004.
[21] H. T. S. Onoe, K. Hoshino, K. Matsumoto and I. Shimoyama, "Miniature fuel cell with conductive silicon electrodes," presented at Transducers'05, Seoul, Korea, 2005.
[22] 紀俊偉, "流道幾何參數對直子交換膜燃料電池性能的影響," in 機械所. 中壢: 元智大學, 2004.
[23] 薛. 黃秋萍, 吳富其, 高志勇, "直接甲醇燃料電池的核心膜電極組(MEA)," in 工業材料, 2003, pp. 141-150.

全文公開日期本全文未授權公開 (校內網路)
全文公開日期本全文未授權公開 (校外網路)

簡易檢索 / 詳目顯示

相關論文