簡易檢索 / 詳目顯示

回結果列表
研究生： 李立宇
Li, Li-Yu
論文名稱： 使用爐管擴散製作異質接面矽晶太陽能電池
Fabrication of Silicon Heterojunction Solar Cells Using Furnace Diffusion Technology
指導教授： 王立康
Wang, Li-Karn
口試委員:
學位類別： 碩士
Master
系所名稱： 電機資訊學院 - 光電工程研究所
Institute of Photonics Technologies
論文出版年： 2010
畢業學年度： 98
語文別： 中文
論文頁數： 85
中文關鍵詞： 異質接面 、太陽能電池 、爐管擴散 、矽晶 、非晶矽 、鈍化 、透明導電膜
外文關鍵詞： heterojunction, solar cell, Furnace Diffusion, amorphous silicon, passivation, high-low junction, ITO
相關次數： 點閱：3  下載：0 
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報

    • 本研究的重點有二項，第一，用ITO來當太陽能電池的抗反射層(Anti-Reflection Coating)，利用調控製程參數，在最佳化製程參數，以符合其太陽能電池之抗反射層的需求。第二，我們在此提出一新架構，以傳統平面無絨面(Texture)的矽晶太陽能電池為基礎，利用高溫石英爐管進行擴散，讓太陽能電池的效率有所提升。

    目錄 第一章 序論……………………………………………………………………… 1 1.1 研究背景………………………………………………………………1 1.2 太陽能電池發展現況…………………………………………………1 1.3 文獻回顧………………………………………………………………3 1.4 研究動機………………………………………………………………6 1.5 論文概要………………………………………………………………6 第二章 研究理論……………………………………………………………………8 2.1 太陽能源概論…………………………………………………………8 2.1-1太陽能光譜………………………………………………………9 2.2 基本半導體物理……………………………………………………11 2.2-1晶體結構…………………………………………………………11 2.2-2光吸收……………………………………………………………12 2.2-3半導體摻雜………………………………………………………14 2.2-4同質接面與異質接面……………………………………………17 2.2-5電子電洞的復合…………………………………………………17 2.3 太陽能電池基本原理………………………………………………19 2.3-1 光伏特效應……………………………………………………19 2.3-2 太陽電池工作原理……………………………………………19 2.3-3 太陽能電池等效電路…………………………………………21 2.3-4 太陽能電池基本參數…………………………………………23 2.4 效率損失來源………………………………………………………26 2.4-1 寄生電阻………………………………………………………26 2.4-2 溫度的影響……………………………………………………28 2.4-3 光學損失………………………………………………………29 2.4-4 復合損失………………………………………………………31 2.5 透明導電薄膜………………………………………………………33 2.5-1 透明導電薄膜基本特性………………………………………33 2.5-2 ITO導電特性……………………………………………………34 2.5-3 ITO光學特性……………………………………………………36 第三章 研究方法與製程步驟……………………………………………………38 3.1 實驗方法……………………………………………………………38 3.2 透明導電薄膜………………………………………………………38 3.2-1 ITO靶材…………………………………………………………38 3.2-2 ITO濺鍍製程流程………………………………………………39 3.2-3 ITO薄膜退火處理………………………………………………42 3.2-4 ITO薄膜分析……………………………………………………43 3.3 太陽能電池結構與製程……………………………………………43 3.3-1太陽能電池結構與研究方法……………………………………43 3.3-2 太陽能電池製程步驟…………………………………………44 3.4 實驗機台……………………………………………………………47 3.4-1低壓化學氣相沈積………………………………………………47 3.4-2 電漿輔助化學氣相沉積系統…………………………………48 3.4-3 高溫石英爐管擴散爐…………………………………………49 3.4-4 真空直流濺鍍系統……………………………………………50 3.4-5 真空退火爐管…………………………………………………51 3.4-6 電子束蒸鍍系統………………………………………………52 3.4-7 四點探針………………………………………………………53 3.4-8 紫外光與可見光光譜儀………………………………………54 3.4-9 拉曼光譜量測系統……………………………………………54 3.4-10 展阻量測系統…………………………………………………55 第四章 數據分析與結果討論……………………………………………………56 4.1 ITO薄膜數據分析與討論……………………………………………56 4.1-1 工作壓力………………………………………………………56 4.1-2 直流電壓………………………………………………………58 4.1-3 真空退火………………………………………………………59 4.1-4 結果與討論……………………………………………………63 4.2 異質矽晶太陽能電池數據分析與討論……………………………65 4.2-1 爐管擴散時間…………………………………………………65 4.2-2 非晶矽之爐管擴散……………………………………………69 4.2-3 異質接面矽晶太陽能電池……………………………………72 4.2-4 結果與討論……………………………………………………79 第五章 結論………………………………………………………………………81 參考文獻……………………………………………………………………………82

    參考文獻
    [1] D.M. Chapin, C.S. Fuller, and G.L. Pearson, “A new Silicon p-n Junction Photocell for Converting Solar Radiation into Electrical Power”, J.Appl. Phys., vol. 25, 676-677, 1954
    [2] William Sockley, and Hans J. Queisser, “Detailed Balance Limit of Efficiency of p-n Junction Solar Cells”, J.Appl. Phys., vol. 32, no. 3, 510-519, 1961.
    [3] 黃惠良, 曾百亨 , 太陽電池, 五南出版社, 2008
    [4] http://sanyo.com/news/2009/05/22-1.html
    [5] Armin G. Aberle ,“Surface Passivation of Crystalline Silicon Solar Cells：A Review”, Prog. Photovolt: Res. 8, 362-376, 2000
    [6] Mandelkorn J, Lamneck JH.“Simplified fabrication of back surface electric field silicon cells and novelcharacteristic of such cells ” , In Proceedings of the 9th IEEE Photovoltaic Specialists Conference, New York, 66, 1972
    [7] Asuha, Y. L. Liu, O. Maida, M. Takahashi, and H. Kobayashi, “Post oxidation Annealing Treatments to Improve Si/Ultrathin SiO2 Characteristics Formed by Nitric Acid Oxidation” J. Electrochem.Soc., vol. 151, no.12, G824-G828, 2004.
    [8] T. Lauinger, J. Schmidt, A. G. Aberle, and R. Hezel, “Record low surface recombination velocities on 1 Ω cm p-silicon using remote plasma silicon nitride passivation,” Appl. Phys. Lett., vol. 68, no. 9, 1232-1234, 1996
    [9] B. Sopori and Y. Zhang, ”H-Diffusion Mechanism(s) in PECVD Nitride Passivation of Si Solar Cells,” NCPV 1st Conf. Program Review Meeting, Lakewood Colorado, 14-17, 2001
    [10] I. Martin, M. Vetter, A. Orpella, J. Puigdollers, A. Cuevas and R. Alcubilla,“Surface passivation of p-type crystalline Si by plasma enhanced chemical vapor deposited amorphous SiCx: H films,” Appl. Phys. Lett., vol. 79, no. 14, 2199-2201, 2001
    [11] S. K. Dhungel, J. Yoo, K. Kim, B. Karunagaran, H. Sunwoo, D. Mangalaraj, and J. Yi, “Effect of pressure on surface passivation of silicon solar cell by forming gas annealing,” Mater. Sci. Semicond. Process., vol. 7, 427-431, 2004
    [12] V. D. Mihailetchi, Y. Komatsu, and L. J. Geerligs, “Nitric acid pretreatment for the passivation of boron emitters for n-type base silicon solar cells,” Appl. Phys. Lett. ,vol. 92, no. 6, 063510, 2008
    [13] M. Tanaka, M. Taguchi, T. Matsuyama, T. Sawada, S. Tsuda, S. Nakano, H. Hanafusa and Y. Kuwano,“Development of New a-Si/c-Si Heterojunction Solar Cells: ACJ-HIT (Artificially Constructed Junction-Heterojunction with Intrinsic Thin-Layer)”, Jpn. J. Appl. Phys. 31 , 3518-3522, 1992
    [14] M. Taguchi , K. Kawamoto, S. Tsuge, T. Baba, H. Sakata, M. Morizane, K. Uchihashi, N. Nakamura, S. Kiyama and O. Oota, “HITTM cells - high-efficiency crystalline Si cells with novel structure”, Prog. Photovolt: Res. 8, 503-513, 2000
    [15] A. Luque and S. Hegedus, Handbook of Photovoltaic Science and Engineering, Chap. 3, John Wiley & Sons, Ltd, 2003.
    [16] Streetman, Ben G.; Sanjay Banerjee (2000). Solid State electronic Devices (5th ed.). New Jersey: Prentice Hall. p. 524. ISBN 0-13-025538-6
    [17] http://nobelprize.org/nobel_prizes/physics/laureates/2000/
    [18] S. M. Sze, “Physics of Semiconductor Devices”, 2nd Edition.
    [19] K. L. Chopra, S. Major and D. K. Pandya ,“Transparent conductors—A status review”, Thin Solid Films, vol. 102,1-46 ,1983
    [20] John C. C. Fan and F. J. Bachner, “Properties of Sn-Doped In2O3 Films Prepared by RF Sputtering”J. Electorchem. Soc. 122, 1719-1724 ,1975
    [21] Y. Shigesato, Y. Hayashi and T. Haranoh,“Electrical and structural properties of low resistivity tin‐doped indium oxide films”, Appl. Phys.Lett.61,73-75 ,1992
    [22] W. F. Wu, B. S. Chiou and S. T. Hsieh, “Effect of sputtering power on the structural and optical properties of RF magnetron sputtered ITO films”, emicond. Sci. Technol. 9 1242, 1994
    [23] M. Quaas, C. Eggs and H. Wulff, “Structural studies of ITO thin films with the Rietveld method”, Thin Solid Films, vol.332, 277-281, 1998
    [24] W. F. Wu and B. S. Chiou,“Properties of radio-frequency magnetron sputtered ITO films without in-situ substrate heating and post-deposition annealing”, Thin Solid Films, 247, 201-207, 1994
    [25] V. S. Reddy, K. Das, A. Dhar and S. K. Ray, “The effect of substrate temperature on the properties of ITO thin films for OLED applications”, Semicond. Sci. Technol. 21, 1747–1752, 2006
    [26] Y. Hu, X. Diao, C. Wang, W. Hao, T. Wang,“Effects of heat treatment on properties of ITO films prepared by rf magnetron sputtering”, Vacuum, 75, 183–188, 2004
    [27] 楊明輝, 透明導電膜, 2006
    [28] E. Burstein,“Anomalous Optical Absorption Limit in InSb”, Phys. Rev. 93, 632-633, 1954
    [29] Yeon Sik Jung and Sung Soo Lee, “Development of indium tin oxide film texture during DC magnetron sputtering deposition”, Journal of Crystal Growth, 259, 343–351, 2003
    [30] D. Kim, Y. Han, J. S. Cho and S. K. Koh,“Low temperature deposition of ITO thin films by ion beam sputtering”, Thin Solid Films, vol.377-378, 81–86, 2000
    [31] J. C. C. Fan and F. J. Bachner,“Properties of Sn-Doped In2O3 Films Prepared by RF Sputtering”, J. Electrochemi. Soc. 12, 1719-1724,1975
    [32] H. L. Hwang, J. Y. Lin, and C. Y. Sun,“Research and Development oh High-Efficiency Space Silicon Solar Cells”, 2nd Conference on Space Technology Research, 337-341, 1994
    [33] N. Jensen, U. Rau, R. M. Hausner, S. Uppal, L. Oberbeck, R. B. Bergmann, and J. H. Werner, “Recombination mechanisms in amorphous silicon/crystalline silicon heterojunction solar cells”, J. Appl. Phys. 87, 2639, 2000
    [34] Y. Matsumoto, S. Robles and S. J. Sandoval,“Short Thermal Annealing for Crystallization of Plasma-CVD Amorphous Silicon Films”, Superficies Vacio, 10, 5-8, 2000
    [35] N. Jensen, R. M. Hausner, R. B. Bergmann, J. H. Werner and U. Rau,“Optimization and characterization of amorphous/crystalline silicon heterojunction solar cells”,Prog. Photovolt: Res., 10, 1-13, 2002
    [36] O. V. Roos,“A simple theory of back surface field (BSF) solar cells”, J. Appl. Phys. Vol.49, 3503, 1978
    [37] H. Fujiwara and M. Kondo, “Effects of a‐Si:H layer thicknesses on the performance of a‐Si:H/c‐Si heterojunction solar cells”, J. Appl. Phys. 101, 054516, 2007
    [38] M. Schaper, J. Schmidt, H. Plagwitz and R. Brendel,“20.1%-efficient Crystalline Silicon Solar Cell with Amorphous Silicon Rear-surface Passivation”, Prog. Photovolt: Res. 13, 381–386, 2005

    無法下載圖示 全文公開日期 本全文未授權公開 (校內網路)
    全文公開日期 本全文未授權公開 (校外網路)
    全文公開日期 本全文未授權公開 (國家圖書館：臺灣博碩士論文系統)
    QR CODE