成衣業屬勞力密集性產業，在國際化環境的壓力下，競爭非常激烈。成衣業製程可分為四個主部份，分別為設計/服裝模板、裁剪、車縫與整燙/包裝，其中車縫作業為最關鍵一環，需要最多的人力及物力。在車縫作業中進行生產線平衡規劃，其目的在於妥善指派工序至各工作站，使工作站中之機台能執行所分派之工序，以減少人力需求，提升生產效率，並降低成本。
本論文主要發展成衣業之生產線平衡系統，應用群組基因演算法（Grouping Genetic Algorithm，GGA）開發啟發式演算法。在週期時間已知情況下指派工序到任一工作站，求解最小生產成本。本研究蒐集成衣業生產數據來驗證所發展之生產線平衡系統之績效。成衣車縫作業生產線平衡問題中以成本為考量的研究文獻較少，由實驗結果得知，本研究所發展之生產線平衡系統，是有效求解成本導向之生產線平衡問題的方法，對成衣業的實用價值很高。

Apparel manufacturing is a labor-intensive traditional industry. Under the pressure of internationalization, the competition in this industry is quite drastic. The production process of garments is separated into four main phases: designing/clothing pattern generation, fabric cutting, sewing and ironing/packing. Among these, sewing is the most critical process which needs lots of human and materials resource. The purpose of assembly line balancing problem (ALBP) in sewing lines is to assign tasks to the workstations making the machines of the workstations perform the assigned tasks in order to reduce manpower, increase efficiency and lower the total cost.
This thesis develops a line balancing system for apparel manufacturing industry. Grouping genetic algorithm (GGA) is applied to develop heuristics in the proposed line balancing system. For a given cycle time, tasks are assigned to workstations to minimize the total relevant cost. This research verifies the performance of the proposed line balancing system by collecting data from real apparel manufacturing factory. There is only limited literature in the area of ALBP with cost consideration. The computational results reveal that the line balancing system developed in this thesis is effective in solving cost-oriented assembly line balancing and worker assignment problem (CALBWAP) which has high practical value in apparel industry.

Amen, M. (2000a). “An exact method for cost-oriented assembly line balancing”, International Journal of Production Economics, Vol. 64, pp. 187-95.
Amen, M. (2000b). “Heuristic methods for cost-oriented assembly line balancing: a survey”, International Journal of Production Economics, Vol. 68, pp. 1-14.
Amen, M. (2001). “Heuristic methods for cost-oriented assembly line balancing: a comparison on solution quality and computing time”, International Journal of Production Economics, Vol. 69, pp. 255-64.
Askin, R. and Zhou, M. (1997). “A parallel station heuristic for the mixed-model production line balancing problem”, International Journal of Production Research, Vol. 35 No. 11, pp. 3095-105.
Becker, C. and Scholl, A. (2006). “A survey on problems and methods in generalized assembly line balancing”, European Journal of Operational Research, Vol. 168, pp. 694-715.
Blum, C., & Miralles C. (2011). On Solving the Assembly Line Worker Assignment and Balancing Problem via Beam Search, Computers and Operations Research, 38(1), 328-339.
Borba, L., & Ritt, M. (2014). A heuristic and a branch-and-bound algorithm for the Assembly Line Worker Assignment and Balancing Problem, Computers & Operations Research, 45, 87 -96.
Boysen, N., Fliedner, M., & Scholl, A. (2007). A classification of assembly line balancing problems, European Journal of Operational Research, 183, 674 – 693.
Boysen, N., Fliedner, M., & Scholl, A. (2008). Assembly line balancing: Which model to use when?, International Journal of Production Economics, 111, 509 –528.
Brown, E.C., and Sumichrast, R.T., (2005). Evaluating performance advantages of grouping genetic algorithms, Engineering Applications of Artificial Intelligence, 18, 1-12.
Bukchin, Y., & Sofer, T. (2011). Bi-directional work sharing in assembly lines with strict and flexible assembly sequences, International Journal of Production Research, 49, 14, 4377 -4395.
Chaves A.A., Lorena L.N., & Miralles C. (2007). Clustering search approach for the assembly line worker assignment problem. In: Proceedings of the 37th international conference on computers and industrial engineering. Alexandria, Egypt, 1469 –78.
Chaves A.A., Lorena L.N., & Miralles C. (2009). Hybrid metaheuristic for the assembly line worker assignment problem, Lecture Notes in Computer Science, 5818, 1-14.
Chen, R.S., Lu, K.Y., and Yu, S.C., (2002). A hybrid genetic algorithm approach on multi-objective of assembly planning problem, Engineering Applications of Artificial Intelligence, 15, 447-457.
Corominas A., Pastor R., & Plans J. (2008). Balancing assembly line with skilled and unskilled workers, Omega, 36, 1126-1132.
Emde, S., Boysen, N., & Scholl, A. (2010). Balancing mixed-model assembly lines: a computational evaluation of objectives to smoothen workload, International Journal of Production Research, 48, 11, 3173 -3191.
Falkenauer, E., (1992). The grouping genetic algorithm-widening the scope of the Gas, JORBEL-Belgian Journal of Operations Research, Statistics and Computer Science, 33, 79-102.
Falkenauer, E., (1996). A hybrid grouping genetic algorithm for bin packing, Journal of Heuristics, 2, 5-30.
Gamberini, R., Gebennini, E., Grassi, A., and Regattieri, A., (2009). A multiple single-pass heuristic algorithm solving the stochastic assembly line rebalancing problem, International Journal of Production Research, 47, 8, 2141-2164.
Grangeon, N., Leclaire, P., & Norre, S. (2011). Heuristics for the re-balancing of a vehicle assembly line, International Journal of Production Research, 49, 22, 6609 -6628.
Haq, A.N., Jayaprakash, J. and Rengarajan, K., (2006). A hybrid genetic algorithm approach to mixed-model assembly line balancing, The International Journal of Advanced Manufacturing Technology, 28, 337-341.
Heimerl, C., & Kolisch, R. (2009). Work assignment and qualification of multi-skilled human resources under knowledge depreciation and company skilled level targets, International Journal of Production Research, 48, 13, 3759 -3781.
Holland, J.H., (1975). Adaptation in Natural and Artificial Systems: An Introductory Analysis with Applications in Biology, Control, and Artificial Intelligence. Ann Arbor, University of Michigan Press.
Hwang, R.K., and Katayama, H., (2009). A multi-decision genetic approach for workload balancing of mixed-model U-shaped assembly line systems, International Journal of Production Research, 47, 14, 3797-3822.
Kara, Y., Gokcen, H., Atasagun, Y. (2010). Balancing parallel assembly lines with precise and fuzzy goals, International Journal of Production Research, 48, 6, 1685 -1703.
Kim, Y. (1996). Genetic algorithms for assembly line balancing with various objectives, Computers and Industrial Engineering, 30, 397 – 409.
Miralles, C., Garcia-Sabater, J.P., Andrés, C., & Cardos, M. (2007). Advantages of assembly lines in sheltered work centers for disabled: A case study, International Journal of Production Economics, 110, 187 –197.
Miralles, C., Garcia-Sabater, J.P., Andrés, C., & Cardos, M. (2008). Branch and bound procedures for solving the assembly line worker assignment and balancing problem: application to sheltered work centers for disabled, Discrete Applied Mathematics, 156, 352 –67.
Nearchou, A.C., (2008). Multi-objective balancing of assembly lines by population heuristics, International Journal of Production Research, 46, 8, 2275-2297.
Ozcan, U., Cercioglu, H., Gokcen, H. & Toklu, B. (2010a). Balancing and sequencing of parallel mixed-model assembly lines, International Journal of Production Research, 48, 17, 5089 -5113.
Ozcan, U., Gokcen, H. & Toklu, B. (2010b). Balancing parallel two -sided assembly lines, International Journal of Production Research, 48, 16, 4767 -4784.
Pankratz, G., (2005). A grouping genetic algorithm for the pickup and delivery problem with time window, OR Spectrum, 27, 21–41.
Scholl, A. and Becker, C. (2005). “A note on ‘An exact method for cost-oriented assembly line balancing’”, International Journal of Production Economics, Vol. 97, pp. 343-52.
Tabitha, J., Vroblefski, M., and Nottingham, Q., (2007b). A hybrid grouping genetic algorithm for the registration area planning problem, Computer Communications, 30, 2180–2190.
Tabitha, J.L., Evelyn, B.C., and Kellie, K.B., (2007a). A hybrid grouping genetic algorithm for the cell formation problem, Computers & Operations Research, 34, 2059-2079.
Tasan, S. O., & Tunali, S. (2008). A review of the current applications of genetic algorithms in assembly line balancing, Journal of Intelligent Manufacturing, 19(1), 49 –69.
Tseng, H.E., Chen, M.H., Chang, C.C., and Wang, W.P., (2008). Hybrid evolutionary multi-objective algorithms for integrating assembly sequence planning and assembly line balancing, International Journal of Production Research, 46, 21, 5951-5977.
Venkatesh, J.V.L. and Dabade, B.M., (2008). Evaluation of performance measures for representing operational objectives of a mixed model assembly line balancing problem, International Journal of Production Research, 46, 22, 6367-6388.
Wong, W.K., Mok, P.Y., Leung, S.Y.S. (2006). Developing a genetic optimization approach to balance an apparel assembly line, International Journal of Advanced Manufacturing Technology, 28, 387 -394.