在廿一世紀，電子產品透過高科技技術日新月異的發展，不停的追求精緻化，其運用功能更講求多元化，這同時意味著有許多挑戰與技術突破。依據現今相關調查數據顯示電子產品主要的失效問題為溫度散熱不易與震動所導致，因此如何量測產品的極限與能力特性是個很重要的議題。
產品可靠性能力測試有許多方法測量，而最適合的測試設備為高加速壽命試驗系統– HALT (Highly accelerated Life Test)，其可測出產品的極限，瞭解設計缺陷改善。HALT主要的檢驗測試應力為溫度與震動，經過各類型之測試分析，可了解其產品之能力範圍。
本研究為將一個市面上常用之組裝系統與主機板進行高加速壽命試驗系統檢驗測試，我們可以得知此組裝系統之正常操作溫度範圍為 -40℃ 至 85℃，其震動可承受至少50Grms；主機板之正常操作溫度範圍 -25℃至45℃，其震動承受最大值為40 Grms。
雖然高加速壽命試驗系統檢驗測試並非為真實的產品壽命測試，但透過測驗結果可以更了解其正常運作環境範圍與使用的耐力極限。在每次的測試階段，將會不斷的檢驗其功能是否能正常執行運作，當遇到失效時，其確認失效問題的主要原因。經過進行修改與恢復後，將會測驗出更多的失效情形，當主要問題大部分都檢測出來，經過改善可增加產品的使用範圍，如此一來可以提升產品的壽命與可靠性。

In twenty-first century, products are getting more and more technical and multifunctional; lots of researchers start to join the team and create new innovation. Meanwhile, when the products become smaller and more powerful, it also means that there are many challenges have to be solved. It is become an important issue about how to acquire products’ property of function operating limitation. According to some experiments and analysis, we can know that the most failure factors of product are the temperature and vibration.
In order to make sure the product’s fundamental limit, Highly Accelerated Life Test (HALT) is the best tool to get the information; HALT is a process in which products are subjected to accelerated environments to find weak links in the design and manufacturing process. In this research, we choose two samples for the HALT experiment test, one is a system and another is a motherboard. After the temperature stress, vibration stress, combined thermal and vibration stress, we can claim that the system can work within -30℃ to 75℃, under 50 Grms vibration. And motherboard works within -25℃ to 45℃under 40 Grms.
Although HALT isn’t a true life test, using HALT process can determine operation and endurance limit. At each level of applied stress, functional testing is performed on the product sample to evaluate its operation. When a failure occurs, the failure mode and stress level is recorded, and the root cause of the failure is determined. As the failure modes are found and eliminated, limits are pushed further and further out, maximizing margins and increasing the product’s life and reliability.

1.D. Hart，“Fatigue Testing of a Component Lead in a Plated Through Hole”，IEEE Proceedings of the National Aerospace and Electronics Conference，pp.1154-1158，1988.
2.賴耿陽，產品壽命管測技術，復漢出版社，中華民國88年
3.P. Norman，“Environmental Stress Screening of Electronic Assemblies”，A thermal Transient Study， IEEE Proceedings Electronic Components and Technology Conference，pp.93-98，1993.
4.T. P. Parker，“A Study of Failures Identified during Board Level Environmental Stress Testing”，IEEE Transactions on Components，Hybrids and Manufacturing Technology，Vol. 15，No. 6，pp.1086-1092，1992.
5.Gregg Hobbs，Accelerated Reliability Engineering，Hobbs Engineering Corporation，Colorado，2000.
6.曾勝蒼，黃登源，王啟旭，「電子產品加速壽命試驗研究」，行政院國家科學委員會研究報告，中華民國77年
7.J. Shams and N. Tom，“Accelerated Reliability Tests: Solder Defects Exposed”，IEEE Proceedings Annual Reliability and Maintainability Symposium，pp.43-49，1999.
8.黃俊仁，「溫度循環及溫變率大小對於電子產品之破壞效應評估(一)(二)」，國防科技發展方案學術合作協調小組研究報告，計畫編號89-CS-D-008-008，中華民國89年。
9.F. A. Stam，“Effects of Thermal mechanical Cycling on Lead and Lead-free (SnPb and SnAgCu) Surface Mount Solder Joints”，Microelectronics Reliability，Vol. 41，No. 11，pp.1815-1822，2001.
10.L. Condra，“Comparison of Plastic and Hermetic Microcircuits Under Temperature Cycling and Temperature Humidity Bias”，IEEE Transactions on Components， Hybrids，Manufacturing Technology，Vol. 15，No. 5，pp.640-650，1992.
11.Z.P. Wang，“Board Level Reliability Assessment of Chip Scale Packages”，Microelectronics and Reliability，Vol. 39，No. 9，pp.1351-1356，1999.