本文依據文獻中提出一量測路徑規劃，以兩轉動軸同動，三線性軸不動之方式將DBB量測工具應用於五軸工具之旋轉軸動態誤差量測，對常見之三種五軸工具機類型分別建立其量測路徑，對其量具干涉及量測靈敏度進行分析，以建立最佳化之量測參數，並建立其DBB循圓量測之誤差圖譜。此外，對兩轉動軸增益不匹配之動態誤差，以增益調變、前饋控制及主從控制，分別模擬其減少誤差之效果並加以討論。

[1] V. S. B. Kiridena and P. M. Ferreira, “Kinematic Modellng of Quasistatic Errors of Three-Axis Machining Centers”, Int. J. Mach. Tools Manufact, vol. 34, pp. 85-100, 1994.
[2] S. Sakamoto, I. Inasaki, H. Tsukamoto, and T. Ichikizaki, “Identification of alignment errors in five-axis machining centers using telescoping ball bar”, Transactions of the Japan Society of Mechanical Engineers Part C, vol. 63, pp. 262-267, 1997.
[3] 雷衛台, 王智益, "五軸銑床幾何誤差之分析、量測與補償", 中國機械工程學會第十三屆學術研討會.
[4] Z. A. Ahmad, Y. Kakino, Y. Ihara, and S. Lin, “Analysis of the motion accuracy of 5-axis controlled machining centers using DBB method”, International Conference on Precision Engineering, pp. 55-60, 1997.
[5] J. B. Bryan, “A simple method for testing measuring machines and machine tools, Part I: Principle and applications”, Journal of Precision Engineering 4(2), pp. 61-69, 1982.
[6] S. H. Suh, E. S. Lee, and S. Y. Jung, “Error modeling and measurement for the rotary table of five-axis machine tools”, International Journal Advanced Manufacturing Technology, vol. 14, pp. 656-663, 1998.
[7] W. T. Lei and Y. Y. Hsu, “Accuracy test of five-axis CNC machine tools with 3D probe-ball, part II: errors estimation”, International Journal of Machine Tools & Manufacture, vol. 42 , pp. 1163-1170, 2002.
[8] 廖明毅, “以DBB量測及校正五軸工具機之幾何誤差”, 國立清華大學碩士論文, 2002.
[9] M. Tomizuka, ”Zero Phase Error Tracking Algorithm for Digital Control”, Journal of Dynamics System Measurements and Control, vol. 109, pp. 65-68, 1987.
[10] M. Weck and G. Ye, “Sharp Corner Tracking Using the IKF Control Strategy”,Annals of CIRP, vol. 39, pp. 437-441, 1990.
[11] 洪明諒, “高速高精度CNC工具機之前饋控制”, 國立清華大學碩士論文, 2000.
[12] S. Kim and D. Kim , “Iterative Learning Control Method with Application for CNC Machine Tools” , IEEE Industry Applications, vol. 32, pp. 66-72, 1993.
[13] 宋漢釧, “CNC工具機高速進給軌跡精度改進研究”, 國立清華大學碩士論文, 1998.
[14] 劉偉樂, “五軸工具機旋轉軸之動態誤差量測方法”, 國立清華大學碩士論文, 2003.
[15] 莊育喬, “五軸工具機旋轉軸動態誤差量測與改善研究”, 國立清華大學碩士論文, 2004.
[16] Y. Kakino, Y. Ihara, and A. Shinohara, Edited by Dr. Johannes Heidenhan Gmbh,“Accuracy Inspection of NC Machine Tools by Double Ball Bar Methid”, Hanser/Gardner Publications, Inc., 1993.
[17] S. SAKAMOTO, and I.Inasaki, “Analysis of Generating Motion for Five-Axis Maching Centers”, Transactions of the Japan Society of Mechanical Engineers Part C, vol. 59, pp. 223-229, 1993.
[18] 吳嘉晉, “進給驅動系統之動態模擬與分析”, 國立清華大學碩士論文,2003.
[19] G. Stute, K. H. Bobel, J. Hesselbach, “Electrical feed drives for machine tools”, Chichester, 1983.
[20] J.-S.R.Jang, C.-T.Sun, E.Mizutani, Neuro-Fuzzy Soft Compiting, Prentice-Hell International, Inc.,London. 1997
[21] 姚武松, “高速工具機之線性伺服系統設計”, 國立成功大學博士論文,2002.
[22] 林彥宏, “五軸虛擬機構系統一般化建構之研究”, 國立成功大學碩士論文,2004.
[23] W.T. Lei, M.P. Sung, W.L. Liu, Y.C. Chuang, “Double ballbar test for the rotary axes of five-axis CNC machine tools”,International Journal of Machine Tools & Manufacture.,in press.