本文係研究漸開線正齒輪在嚙合運轉過程中，在齒面上可能發生的磨耗現象。茲應用Archard磨耗理論於齒面上磨耗的分析，並提出一適當公式來說明齒面上所承受的載荷、齒輪的材料、齒輪的尺寸大小與磨耗壽命的關係，藉由此分析模式來計算齒輪的磨耗壽命，且在適當的時候更換齒輪，並使得齒輪能更被充分的被應用。

1.ASTM G 40-82, Standard terminology relating to erosion and wear.
2.G. W. Rowe, Friction wear and lubrication terms and definitions, Organization for Economic Cooperation and Development, Binmingham, Gt. Britain, 1966.
3.J. F. Burwell, C. D. Strang, On the empirical law of adhesive wear, J. Appl. Phys., 23 (1952) 18-28.
4.J. F. Archard, W. Hirst, The wear if metals under unlubricated conditions, Proc. R. Soc. Lond. 236A, (1956) 397-410.
5.M. B. Peterson, M. B. Peterson, W. O. Winer (Eds.), Wear control handbook, ASME, 1980.
6.K. L. Wang, H. S. Cheng, A numerical solution to the dynamic load, film thickness, and surface temperatures in spur gears, Part 1 Analysis, ASME J. Mech. Design 103 (1981) 177-187.
7.S. Wu, H. S. Cheng, Sliding wear calculation in spur gears, J. Tribol. 115 (1993) 493-500.
8.Y. Ding, R. Jones and B. T. Kuhnell, Numerical analysis of subsurface crack failure beneath the pitch line of a gear tooth during engagement, Wear, 185 (1995) 141-149.
9.A. Flodin and S. Andersson, Simulation of mild in spur gears, Wear, 207 (1997) 16-23.
10.N. A. Wright, S. N. Kukureka, Wear testing and measurement techniques for polymer composite gears, Wear, 251 (2001) 1567-1578.
11.E. Buckingham, Analytical mechanics of gears, McGraw-Hill, New York, 1949.
12.施鴻文,漸開線正齒輪應力分析,碩士論文,國立清華大學,1997.
13.朱景梓, 張展, 秦立高, 漸開線外嚙合圓柱齒輪傳動, 國防工業 出版社, 北京市, 1990.
14.孫家樞, 金屬的磨損, 冶金工業出版社, 北京市, 1992.
15.E. Rabinowicz, Friction and wear of materials, 2nd ed., Wiley, New York, 1995.
16.K. C. Ludema, Friction, wear, lubrication, CRC Press, Boca Raton, 1996.
17.F. P. Bowden, D. Tabor, Friction and lubrication of solids, Part I, Clarendon Press, Oxford, 1954.
18. W. Hirst, Wear of unlubricated metal, Proceedings of the Conference on Lubrication and Wear, Institution of Mechanical Engineers, London, (1957) 674-681
19. N. P. Suh, N. Saka, Fundamentals of tribology, MIT Press, 1980.
20. N. Ohmae, E. Rabinowicz, The wear of the noble metals, ASLE Trans., 23 (1980) 86-92.
21. R. Holm, Electric contacts, Almquist and Wiksells, Stockholm, 1946, Section 40.
22. Glaeser, A. William, Materials for tribology, Elsevier Science, New York, 1992